Still Having Loft Issues....

jared_ja
jared_ja Member Posts: 12 ✭

So earlier I posted a question regarding my inability to resolve a loft in my project. After receiving some help I was able to get it to "partially" resolve. However I am still unable to use all of my guide lines. The loft continues to fail anytime I add a 3rd guide line and onshape almost always refers to one of the points where one of the splines (more often than not the one I select as the 3rd) pierces the bottom profile. The initial issue was evidently a little messy geometry. Fixing this allowed for the loft to resolve, just not exactly the way I wanted. So I am once again at a loss. Ive included the link to the original post as well as the project link below. Again, any help would be appreciated.

Untitled.png

The Loft with only 2 guide lines applied

Untitled 2.png

The Loft as soon as I apply a 3rd (or more) guide line

Original Post:

Project Link: https://cad.onshape.com/documents/67cac4357fd32fc06a5168f6/w/63b3e2d76ac418bbc68a859e/e/dbba0067b5fb51775ea8271b

Answers