Can't get FRC robot Slider mate in a subassembly to move in main assembly.

The subassembly "2023 Mega Boom" in this project has slider mates to animate the expansion of the "ladder stages" in its project's main assembly. When I Insert it in the robot master project I can't get the slider mates to work. I've checked the Mega Boom's project and removed any Fixed mates but no joy. Stumped on how to troubleshoot this.

The boom subassembly

https://cad.onshape.com/documents/f3f421bbff21d2d802a1fa4b/w/d95b1d9e9b58206738f4e86c/e/369882aa1c2d724eb4f5c301?renderMode=0&uiState=6ae93380f674c8993c939db1

The main assembly

https://cad.onshape.com/documents/0c141cc1733cc7cdec43a963/w/40f9d3b68ecc819a2f716572/e/33c1bd664096bddd898790c3?configuration=default&renderMode=0&uiState=6ae933c1231a078a67a3205b

Answers

  • robert_scott_jr_
    robert_scott_jr_ Member Posts: 949 ✭✭✭

    Hey Marten. Worked for me in both assemblies (documents). - Scotty

  • marten_hutchison
    marten_hutchison Member Posts: 35 EDU

    ??? In the project with the complete robot I can get it to pivot but I can't the mast to extend. I can get the mast to extend in its project.

    Were you able to get it to extend in both projects?

    Thanks for making the time to take a look.

    I don't expect folks to fully troubleshoot the mates but I was hoping someone had a similar issue and could offer some troubleshooting suggestions.

    tks MH

  • marten_hutchison
    marten_hutchison Member Posts: 35 EDU

    Huh, I got it to work. I was simply trying to click and drag on the upper stage, which works in the sub assembly project, but this time I placed triad on the bottom of the second stage and dragged it instead. Odd behavior.🤨