Can't create fillet

michael_ewart
michael_ewart Member Posts: 1 EDU
Hi,

I am trying to create a document for a practice test for my students.  I cannot seem to fillet the back side of the piece.  Here is the link to the document:
https://cad.onshape.com/documents/61e39fb41e8b64e916960848/w/6e2e48c9347c1633abb07bf8/e/2b18e62daf7cf32ba88476f1?renderMode=0&uiState=646be2a25124585cc7a6117c



Here is the instructions file in case I am doing something wrong:
https://cad.onshape.com/documents/d9f4ee39e9f4de2e6d2db665/w/6477c72a460ac4c55d345d46/e/a58d948a51c828a13b133b86

Answers

  • glen_dewsbury
    glen_dewsbury Member Posts: 1,382 PRO
    The fillet at 6mm where it meets the rim is too large for the edge. There just isn't enough material for a fixed width.