bending
Discussion List
-
Sheet metal: I can't select select edges to bend
I'm trying to create a sheet metal model containing a 90° bend. So I created two sketches on two separate planes. Those two sketches touch each other. I then created a sheet metal model using "thicken" mode and selected the sketch regions from my two sketches. Until this point, everything worked great. However, I can't…
-
Bending Radius
Hello,how do you design sheet metal parts?Do you choose the radius of the punch or do you go to the internal bending radius of the die from the press force table? Our standard stamps have a radius of 0.6mm. Greetings Hobie Translated with Google
-
Sheet Metal - Two flanges on one edge
Hello, Can someone help me as I get the second flange down on that edge. I've tried everything I can, but it does not work. Greetings Hobie https://cad.onshape.com/documents/cd039f8ab6a25a136df19cbe/w/2d2970700fc998929181da4e/e/360f4f27b7656e25c62c0b3f
-
Flex or Bend part?
I have some complex organic shapes that need to be wrapped to a surface... Is there a tool for this? Here is a corbel I did WITHOUT this dream Flex tool. Took me forever and it doesn't update if a modify the curved path.
-
Using the sheet metal function
Hi all I am trying to figure out how to make a bend with tab as shown in the corrugated example in the photo. I've tried a number of ways but wondered if anyone has done something similar that they can share that I can analyse. Thanks as always Ian.