hole command

Why doesn't my hole callout display hole depth on a custom hole?
I have created a simple, blind, custom hole using the hole feature for my part. When dimensioning the hole with the hole callout on a drawing, it does not display the hole depth after the diameter. I tried changing the start point with the "Start from Sketch Plane" option and with it selected or not, the hole depth still…
Countersink head size for M4.5 is not correct
I think the numbers provided by the hole wizard are not correct for Countersink ISO Clearance M4.5 Close clearance M4: hole=4.3 head=8.96 Close clearance M4.5: hole=4.8 head=4.8 <--Head size: 7.5? Close clearance M5: hole=5.3 head=11.2 Normal clearance M4: hole=4.5 head=8.96 Normal clearance M4.5: hole=5 head=5 <--Head…

Why doesn't my hole callout display hole depth on a custom hole?
I have created a simple, blind, custom hole using the hole feature for my part. When dimensioning the hole with the hole callout on a drawing, it does not display the hole depth after the diameter. I tried changing the start point with the "Start from Sketch Plane" option and with it selected or not, the hole depth still…
Countersink head size for M4.5 is not correct
I think the numbers provided by the hole wizard are not correct for Countersink ISO Clearance M4.5 Close clearance M4: hole=4.3 head=8.96 Close clearance M4.5: hole=4.8 head=4.8 <--Head size: 7.5? Close clearance M5: hole=5.3 head=11.2 Normal clearance M4: hole=4.5 head=8.96 Normal clearance M4.5: hole=5 head=5 <--Head…

Discussion List