Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.

First time visiting? Here are some places to start:

Looking for a certain topic? Check out the categories filter or use Search (upper right).
Need support? Ask a question to our Community Support category.
Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
Be respectful, on topic and if you see a problem, Flag it.

If you would like to contact our Community Manager personally, feel free to send a private message or an email.

Best Of

Re: Cannot extrude remove due to "merge scope"

@keeagn_karl For extrude removal you need to select the part from which material needs to be removed which is prompted by "Merge scope" dialogue in extrude window. See the below GIF animation

Image: https://us.v-cdn.net/5022071/uploads/editor/ox/gwnuu4hbl7jw.gif

shashank_aarya

Re: How to use expressions to define a dimension relative to another?

Hi Denwen,

Probably the easiest way to achieve what I think you are trying to do is to use a geomtry contraint to make two reference lines equal. I know my geom is 2d whereas it looks like your sketch maybe on a 3d surface but the approach should work either way.

https://cad.onshape.com/documents/c636c963911f17ee0e6638cb/w/9786fde82e9bf847bf4ea0b0/e/c25bc622fe18de917c081dcb?renderMode=0&uiState=691518f6da1438ef34f5e6a7

Hope this helps,

Paddy

patrick_mcgowan580

Re: New FeatureScript: Plastic Threads

Thank you so much for making this script and responding to my newbie question! I did just finish printing the final version of the female thread and removed the additional .5mm I had added to the diameter and with the custom thread pitch of 3 the fit is PERFECT! Just need to reprint the male side in TPU to absorb impact if the inner tubes are dropped in uncontrolled. This part is for the bottom end of an extendable 33ft fiberglass antenna.

Thanks again!

Doug

doug_probst

Re: Switch from Creo w/manufacutring to OnShape with CAM studio for 3 axis milling

I can't help you with CAM, but I can chime in and say that I started CAD with Release 6 of Pro/E and around 2003 got more into Solidworks, and over the last 5 years or so have transitioned fully to Onshape. As Director of Product at an electric scooter company I switched them from Creo to Onshape. To me, it's been a breath of fresh air to not worry about managing the challenges of a file based PDM system and operating system/hardware compatibility/installation issues, etc. Also never losing work and being able to freely branch/merge/collaborate has been huge.

S1mon

Re: Rounding Measured Values in a Custom Table

for (var key in keys(allVars))
{
    var cellValue = allVars[key];
    if (match(key, "^rhett_(\\S+)").hasMatch)
        cellValue = round(allVars[key], 0.001 * millimeter);
    rows = append(rows, tableRow({ "name" : key, "value" : cellValue }));
}

Matt_Shields