Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: Loft to get a cylinder with hole (a hose)
Loft help says "Nested loops in profiles are currently not supported".
However, you can do this with two loft commands. See the gif attached.
Re: New Feature: Poly-Mate Connectors
That's not even the other one I was using before, that's a step up from what I was originally working with but the polyhedron script I used in the demo of this feature takes the cake for me for sheer absurd volume of options. It was apparently based off the mathematic structures on this website.
I haven't exhaustively checked that they're all in the script but it certainly looks like the author took someone's joke of "Oh, you're a fan of shapes? Name every shape" as a personal attack and delivered.
Tutorial double feature: Mate connectors!
Hey everyone, I've been wanting to make some videos deep-diving on mate connectors and I finally did it! The first is all about mates in assemblies (share it with anyone confused about The Onshape Way) and the second is about doing everything except connecting mates with them. Enjoy!
EvanReese
Re: How Do I Make A 3D Wolf
Probably easier to get one out of a forest.
What do you plan to do with the wolf? 3D printing, rendering, animation? Does it need to be organic-looking? If it does, Onshape is not the tool for organic modeling.
_anton
Re: helping with the creation and smoothing of wings
If you look at the curvature of the original curve you created in the Profile generator feature you'l see it is not optimal for smooth surface creation. Since this curve is the basis for all subsequent features, you will face difficulties.
I have found that using two splines: one for the top surface, one for the lower surface is a good idea. The Profile generator offers this as an option, however the curvature of the resulting splines is still not create (since it is still using a fit spline on "noisy" data under the covers of that custom feature )
Last year I helped Holbrook Aerospace create a new Custom feature that tries to address this - HAVF Profile
Alternatively you can use an Edit curve feature after the current Profile generator and do some reapproximation of the sketch, before it is used in the extrude and other features.
Re: Connect two extruded solids (cylinders)
Hello Matteo. Assuming the Front plane is in the center of the part, create a sketch on that plane, making use of the sketch's Use tool to capture the relevant surface edges of the shapes to connect the rib to. Draw a diagonal line between the captured lines to create a closed surface. Extrude that shape to the desired thickness, making sure 'symmetrical' is checked off in the extrude dialog. - Scotty
Re: Connect two extruded solids (cylinders)
Rib Tool works well.
Make sure the sketch for the rib is down a bit from the top or the edges will run past in this situation and throw an error.
