Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
hatching in a detail view
Re: How Do I Make a Hollow Cone at the End of a Hollow Cylinder? I Keep Getting an Error with Revolve
Thank you, everyone, for the helpful guidance. Yes indeed - the problem stemmed from attempting to rotate the full triangle 360 degrees. By reducing the size to one half, I was able to achieve my objective immediately. Thanks!!
Re: No export in 2d (dxf)
This is exactly how I proceeded, but I had problems with the dimensions. I was finally able to mill the 3 parts of my project.
I don't know exactly which template to choose when I create a drawing.
ProApe
Re: Custom Feature: Gridfinity Bin & Base Generators
This is a great piece of work which has saved me hours in creating my own designs!
I wanted to bring to your attention some observations when I checked out the unofficial "specification" at the link: Gridfinity | The modular, open-source grid storage system for your workshop. I don't know if I am missing something but it looks like your bin base and stacking lip are ever so slightly different from that document. I've highlighted the dimensions which look out to me in the sketch below, which shows a cross section of a base below a bin with stacking lip below another bin. Specifically:
a) dimension of the 2.4mm wide face of the bin bottom vs 2.1mm in the "spec"
b) clearance between bin bottom and base is a little larger than the "spec", 0.427mm vs 0.25 (technically I don't think the 0.25 of the "spec" is geometrically possible anyway)
c) the slope of the stacking lip isn't 45 degrees.
I reckon these differences are well inside the printing error of most 3d printers anyway, but I thought it would be useful to run this past you in case there is an issue here. As an engineering document, we might as well be accurate, in case it finds application in more precise manufacturing processes.
Re: Product Catalog (New Custom Feature!) 🆕
Yes, although it would be even cooler if Onshape did it automatically when it recognizes the same geometry and properties. It would be nice to override it if the properties are different but the geometry is the same.
Re: Product Catalog (New Custom Feature!) 🆕
Agreed. Would be great if we could tag parts with a special attribute that would let the assemblies know to that these two parts are supposed to be counted the same in the bom.
Re: ¿how to make a rectangular spiral?
Already two great solutions above. But, if you wanted even another way, a quick FS will do it.
Re: ¿how to make a rectangular spiral?
Kevin's will be the most straight forward way.
Here are a few more steps you could take to make the loop count dynamic with a feature pattern:
https://cad.onshape.com/documents/b7d15015b6ab6321bf96e2b4/w/213b8a00e5bccbbf533d2116/e/0053316…
