Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: Simple Join Issue
not fully defined is just a status. doesn't mean you can't model without it being fully defined
MDesign
Re: Simple Join Issue
Do you want to move it so it touches the rectangular part? Or do you want to unite the bodies? In the latter case, use the boolean tool. In the first case, you'd need the "Transform" Tool and specify a start and end location for the move action. I see you tried that. I recommend using the "by mate connectors" option for this provides a step by step approach and maximum control.
Ideally, though, You'd go back to your sketch 2 and move the base line onto the edge of the rectangular door. That will avoid all the hassle.
As a side remark: Next time you start designing a rectangular part that is basically symmetric, use a center point rectangle in the base sketch, and start it centered on the origin. That'll allow you to use sketch constaints much easier.
Re: Help with creating a loft
Please ignore. In the time the post took to be approved I figured it out 😁.
Re: Loft or Sweep Triangle Shape around Cylinder
you're close!
using guides and path with the current curves is the way to go.
there's too little interference between the cylinder and the triangle to allow the triangle to unite at first. but with a little offset face, it works.
is this the end result you're looking for?
Re: Improvements to Onshape - January 10th, 2025
Yep, this is so great for us… but still we want more power !
Re: i cant figure out wht this wont extrudeno
try the new profile inspector (button next to the final button).
it'll show you some weird stuff that may be causing the issue.
Re: ¿how to make a rectangular spiral?
I ended up using your featurescript with some modifications as some max values were not enough for the spiral i needed to build, excellent!
Re: One or more tabs being moved contain workspace references. All referenced tabs will be moved as part
You've selected movement sketch part studio to be moved. It depends on something else in this workspace ( either derived part studios or a feature studio with a custom feature). If you go ahead and move, the dependencies will move with it. You can try and then revert if you don't like the result. Move out and revert would also accomplish "copy move" .
lana