Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: Integration with ERP/CRM Software (In Particular Dolibarr)?
Yes, we are developing a Dolibarr ERP to OnShape integration currently, it will be available in January.
Mark
E: mark.hutchinson@accellier.com
Re: Integration with ERP/CRM Software (In Particular Dolibarr)?
We (www.accellier.com) have a Dolibarr ERP to OnShape integration in the middle of development, it will be available in January 2025.
To users of our hosted/managed Dolibarr ERP service 'Thrive ERP' this integration is available £FOC, more information is available on - (apologies website being updated and this page is a bit of a mess currently) -
Kind Regards
Mark
E: mark.hutchinson@accellier.com
Re: Does anyone know how to do this?
@EvanReese has a handy featurescript called Shapes for generating things like this automagically.
Re: Improvements to Onshape - December 13th, 2024
All excellent improvements that we'll be using immediately. Thank you Onshape!
Re: Improvements to Onshape - December 13th, 2024
restrict sharing… 😂. limiting cheaters from tricking volunteers into doing their homework.
MDesign
Re: How to get a small section of my model
Extrude that shape with Intersect on, or extrude a surface and use Split.
S1mon
Re: How can I lengthen the fillet?
Your cylinder is 7mm diameter so you can't put a fillet more than 3.5mm without creating a sharp point. I'm guessing you want the tip to start curving 5mm from the end…
Two options I can think off depending what you are trying to do…
- You could try using the asymmetrical option in the fillet tool to go 5mm one way and 3 the other way.
- Sketch the shape you want and revolve to remove material.
Re: Is there an option to 'Return to the Previous View' (eg, after rotating the view)
I would vote for this too. Seems like an obvious oversight, given the volume of more advanced functionality. I also would vote for more rapid access to named views; something more like the spacebar view menu in SW.
Re: Is there an option to 'Return to the Previous View' (eg, after rotating the view)
Re: Improvements to Onshape - December 13th, 2024
Great Stuff! Very happy that we can finish multiple sheet metal parts in one feature. And Render Studio will be much more productive with those appearance tools!