Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: lofting from a sketch gets screwed up by other sketches on the same plane
@_anton
He's saying he only selected sketch1 which doesn't have any internal regions. But the red preview does suggest there is a face of the solid selected in there somehow.
You also only have one selection for the loft, did you try picking another profile for the loft to see if it solves it? It could just be a graphical glitch (refreshing should also clear that if that's the case).
We might be able to figure what's going on if you share a link to your doc...
He's saying he only selected sketch1 which doesn't have any internal regions. But the red preview does suggest there is a face of the solid selected in there somehow.
You also only have one selection for the loft, did you try picking another profile for the loft to see if it solves it? It could just be a graphical glitch (refreshing should also clear that if that's the case).
We might be able to figure what's going on if you share a link to your doc...
Certifications
Is it possible to get free vouchers for exams if you are a subscriber? how does one go about acquiring one? thanks
Re: Merge a revolve with a curved face
To make your revolve blend with the tube you might want to adjust the curve position in sketch 2 as well as making the curve ends tangent.
https://cad.onshape.com/documents/99a86654da0404e638e17fa6/w/054ada85e11e4b3f0a114f51/e/b8af7180f95d2c5d94d7fbd2
https://cad.onshape.com/documents/99a86654da0404e638e17fa6/w/054ada85e11e4b3f0a114f51/e/b8af7180f95d2c5d94d7fbd2
Re: Custom Feature: Cable/Wire Routing
Changelog for 1.179
⭐ Wire refs and Wire routes can now be created manually without needing to import a CSV file first
⭐ Changed the behaviour of References in the Wire data table to make it easier to see which ones have already been defined
⭐ Fixed an issue with Wire ref names being auto-populated more than once
⭐ Fixed an issue with incomplete Wire refs being able to be defined again in another feature
⭐ Fixed empty custom table displaying errors
⭐ Wire refs and Wire routes can now be created manually without needing to import a CSV file first
⭐ Changed the behaviour of References in the Wire data table to make it easier to see which ones have already been defined
⭐ Fixed an issue with Wire ref names being auto-populated more than once
⭐ Fixed an issue with incomplete Wire refs being able to be defined again in another feature
⭐ Fixed empty custom table displaying errors
Re: Oval/Polygon Pattern?
@javl0p_2 I would also use Transform pattern, it will let you create multiple inferred MC's, no need to create it manually
Konst_Sh
1
New custom feature: Make radius
Continuing my practice writing featurescripts I figured I create this feature that I used to use in another CAD system and sometimes missed.
It's similar to a Move Face (offset) but sets the round faces to an absolute radius, rather than a relative offset.
have fun!
Jelte
now available for testing for all:
https://cad.onshape.com/documents/5ecbf1589299fe5f6015ff4f/w/c430cb78e1cefd39880a21d5/e/0e8f6a7b204467a9f8339514
It's similar to a Move Face (offset) but sets the round faces to an absolute radius, rather than a relative offset.
have fun!
Jelte
now available for testing for all:
https://cad.onshape.com/documents/5ecbf1589299fe5f6015ff4f/w/c430cb78e1cefd39880a21d5/e/0e8f6a7b204467a9f8339514
EXPORT BEND TABLE TO CSV
Our company has successfully implemented the Stock Size FS discussed here: https://forum.onshape.com/discussion/comment/77847#Comment_77847
Now we would like to take this one step further by getting info out of the bend table for SM parts. Is there a way to do this or is this in the works?
Thanks,
Cary
Now we would like to take this one step further by getting info out of the bend table for SM parts. Is there a way to do this or is this in the works?
Thanks,
Cary
