Loft between two circles

sebastian_baltes

Hi,

I'm new to onshape and want to make something like a loft between two circles, start is:

and the result should be:

Problem is, this results just in a surface and not a solid. If I try this with Solid Loft, I get an error:

https://cad.onshape.com/documents/a2b72e2d81a1ce069a6e63bc/w/fec7d0c54ef154d44aa1db98/e/b6dfdcb732a8a3696e171940?renderMode=0&uiState=63f89da4b6fb26108c9ce673

Best Regard,

Sebastian

MichaelPascoe

Hi @sebastian_baltes, looks like you figured out what you wanted with chamfer. Something to save you some time would be to have one main sketch then revolve the main sketch in a single revolve. Like this: 

https://cad.onshape.com/documents/f65231bbdc0c8f95ad85dcc9/w/a1645bb9c148af13df5e42d6/e/10b73ef96ceb09b9a86df437?renderMode=0&uiState=63f8c5a3e47dd059a64e8f2e




If you still want to use the loft technique, it is possible to loft the edges as a surface, enclose the surface with the main part, then boolean them together:

MichaelPascoe

Hi @sebastian_baltes, looks like you figured out what you wanted with chamfer. Something to save you some time would be to have one main sketch then revolve the main sketch in a single revolve. Like this: 

https://cad.onshape.com/documents/f65231bbdc0c8f95ad85dcc9/w/a1645bb9c148af13df5e42d6/e/10b73ef96ceb09b9a86df437?renderMode=0&uiState=63f8c5a3e47dd059a64e8f2e




If you still want to use the loft technique, it is possible to loft the edges as a surface, enclose the surface with the main part, then boolean them together:

sebastian_baltes

Wow, thank you so much!