I recieved an SLDPRT file that is a bridge I am trying to turn that in crown.

dillon_hogg

I've partially edited the SLDPRT file to remove the base so it could sit on your head like a crown. But I am having issues using the revolve or wrap tools to make the entire bridge wrap around in a circle. This is the name of the part "Roberto_clemente_bridge.SLDPRT" 

nick_papageorge073

Do you mean you would like the bridge to be a 360 degree circle, so it fits on top of your head like a King's crown? If so, you'll probably need to model that from scratch.

glen_dewsbury

A link to your document would help to see your problem.

dillon_hogg

https://cad.onshape.com/documents/bc9f268c289b1e3ae9ba3ef8/w/9b6de1e28588f46eaab7ed7a/e/2b2b2e0b6219fdf781fcfc17   

I am sorry about that I'm still very new to onshape. 

dirk_van_der_vaart

You mean something like this

https://cad.onshape.com/documents/25aef54714bfaba35375e99c/w/973a9c4618a529cbe68a3c45/e/939e4165c8d38cf6e7133dd8

nick_papageorge073

Do you mean you would like the bridge to be a 360 degree circle, so it fits on top of your head like a King's crown? If so, you'll probably need to model that from scratch.

glen_dewsbury

@dillon_hogg
Something like this? Take a look in both part studios. I used an export dxf of a surface to get a wrap sketch.
https://cad.onshape.com/documents/c3b424034951b26406d55cb1/w/515fd0296ceb003d2a5417ad/e/b20c1d41d9e8e1c2da292d82

nick_papageorge073

@glen_dewsbury Very nice. I didn't know that was possible.

dillon_hogg

Yes thats close to what i wanted but to each pillar be on all four sides. So that would mean i would have to include a third pillar in the drawing. 

dillon_hogg

is there any way to make the thickness of the crown bigger ? 

glen_dewsbury

Just change the value of thicken.