Can you please check what is causing the nonmanifold geometry

jakub_šlahorek162

Hello, I have just completed my first 3D model and when I load it to Bambulab, I receive a waring of a non-manifold geometry. Cura shows that the problem is in the marked regions. However, I do not know how to fix it. Would anyone be so kind and point out the problem please? Thank you! Jakub

https://cad.onshape.com/documents/5df2367fcf8d4801e570bc6a/w/376f9c6a8964b17a368928ab/e/4bcc4dbca50716b3f11efef3?renderMode=2&tangentEdgeStyle=2&uiState=653cf4843cd5453e9df839de




 

glen_dewsbury

If your goal is to include what I see as dark blue surfaces then you will need to enclose them to make them solid and part of the main body. I'm sure the slicer doesn't know what to do with a 'surface'. My sample as exported as stl then imported to see in a part studio.
https://cad.onshape.com/documents/212f393aed3155c6991b49d6/w/830f93841641863702fe566b/e/bebe993a209ef2f18fdfe5af

robert_scott_jr_

Hello Jakub. Within your document I see no part that matches what your image shows in Cura. What did you export? - Scott

jakub_šlahorek162

Hello Robert, I'm sorry. Evidently I did not link any particular ersion (I have been unsucessfully trying to find a solution since the post). Here is a link to a stable version:
https://cad.onshape.com/documents/5df2367fcf8d4801e570bc6a/v/5f3ba1dd145270fc7fa7e315/e/4bcc4dbca50716b3f11efef3?renderMode=0&uiState=653f9a8077edcf48d080192c

Thank you for your help! 

glen_dewsbury

If your goal is to include what I see as dark blue surfaces then you will need to enclose them to make them solid and part of the main body. I'm sure the slicer doesn't know what to do with a 'surface'. My sample as exported as stl then imported to see in a part studio.
https://cad.onshape.com/documents/212f393aed3155c6991b49d6/w/830f93841641863702fe566b/e/bebe993a209ef2f18fdfe5af

jakub_šlahorek162

Hello, Glen, thank you so much! Obviously, I did not know how to properly enclose the area. Not only you solved my problem but also taught me something new. Thank you!!!

jakub_šlahorek162

glen_dewsbury said:

If your goal is to include what I see as dark blue surfaces then you will need to enclose them to make them solid and part of the main body. I'm sure the slicer doesn't know what to do with a 'surface'. My sample as exported as stl then imported to see in a part studio.
https://cad.onshape.com/documents/212f393aed3155c6991b49d6/w/830f93841641863702fe566b/e/bebe993a209ef2f18fdfe5af

Hello, Glen, thank you so much! Obviously, I did not know how to properly enclose the area. Not only you solved my problem but also taught me something new. Thank you!!!