How to add a hole to a face.

eben_alton

Yet another hole in the face question from a new Openshape user.  I created this shape using revolve and I would like to add a hole to the side face.  When I go to make a sketch, it places the sketch along the regular axis or from the centre point. I can't seem to figure out how to place the hole on the face.    Ultimately I want to connect a hole on the side to a hole from the centre.

robert_scott_jr_

Hello Eben. Attached is a link to a document with two methods to attain what I understand is what you are attempting. Let us know if it is not. - Scotty

https://cad.onshape.com/documents/3d0e36003b9b57a9ca5a8457/w/69d4e92a187c0727f6986bd7/e/3ce16f78bafeeaf4faf8e68b

martin_kopplow

Well, this is not actually a hole, it is but a circular extrusion. A hole is done e.g. this way:

https://cad.onshape.com/documents/98257b405cb13ef76f584364/w/72f128a6abe28edb557b8b05/e/b8be85f0f2e52dbcd1be1b4f?renderMode=0&uiState=664731895e16ef7b5ec1870c

robert_scott_jr_

Hello Eben. Attached is a link to a document with two methods to attain what I understand is what you are attempting. Let us know if it is not. - Scotty

https://cad.onshape.com/documents/3d0e36003b9b57a9ca5a8457/w/69d4e92a187c0727f6986bd7/e/3ce16f78bafeeaf4faf8e68b

martin_kopplow

Well, this is not actually a hole, it is but a circular extrusion. A hole is done e.g. this way:

https://cad.onshape.com/documents/98257b405cb13ef76f584364/w/72f128a6abe28edb557b8b05/e/b8be85f0f2e52dbcd1be1b4f?renderMode=0&uiState=664731895e16ef7b5ec1870c

eben_alton

Thank you for your help. On a side note, Where do you access the taskbar that is on your example document you used Scotty?

robert_scott_jr_

Eben, are you referring to the Feature Tree; I'm unsure. - Scotty

eben_alton

This bar pictured below.  Sorry for the late response!

robert_scott_jr_

Eben, that bar is not in my document. It's an interface that gives a viewer of a posted document some tools to use for examination of the document. - Scotty