Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Tab won't bend
alan_curley
Member Posts: 7 ✭
I have a project using sheet metal and I'm trying to see where bends will align with Tabs on the part.
https://cad.onshape.com/documents/4ed0b1f7dd61d9064b56729b/w/82b5013a09cf6bbd88a7875e/e/b6c22f8f2cfd97758c511348
When I follow the instructions, it won't highlight the tabs as a part to bend, regardless of where I place the bend line and what i select as the face, it just bends the whole part.
Has anyone any suggestions?
https://cad.onshape.com/documents/4ed0b1f7dd61d9064b56729b/w/82b5013a09cf6bbd88a7875e/e/b6c22f8f2cfd97758c511348
When I follow the instructions, it won't highlight the tabs as a part to bend, regardless of where I place the bend line and what i select as the face, it just bends the whole part.
Has anyone any suggestions?
0
Best Answer
-
eric_pesty Member Posts: 1,887 PROThe "default" doesn't work but it works if you pick "hold line" for the bend alignment. It also works if you decrease the bend radius a lot (which you probably want to do anyway as it doesn't look great):
1
Answers
.