Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Cannot export to STL
matt_bryer
Member Posts: 5 ✭
I have a document that fails to export to STL. I'm able to export to STEP and 3MF, but attempts to export to STL result in the usual message that export is proceeding and I'll receive a notification with its progress followed by nothing no matter how long I wait.
I'd welcome and value any input anyone can give me about what I've done wrong.
0
Best Answer
-
michael3424
Member Posts: 778 ✭✭✭✭
I was able to export your Part1 to an STL and load it into Prusa Slicer with no problem. The export took a second or so.
1
Answers
Can you repost your link? The current one isn't showing up properly for me.
Unemployed Onshaper- Operating on European time - More of me here ➤➤ https://linktr.ee/Liam.Ghttps://cad.onshape.com/documents/c3cadbfcea69533c3205114b/w/db35304ea2fdcaa232639972/e/082292d32cc53cb4884c00f9?renderMode=0&uiState=6a4f96414a44f465b596a268
Absolutely. Sorry about that!
I was able to export your Part1 to an STL and load it into Prusa Slicer with no problem. The export took a second or so.
Thanks for checking it out! I've tried it again and it's working fine now for me. I assume it was a one-off glitch somewhere. I appreciate you taking the time to check it for me :).