Help me out to get an inclined plane.

pratheek_hosadurga_balaji

I want to create a plane inclined to the top plane, at an angle 30 degree, in a clockwise direction. I want to copy my sketch to the new inclined plane. So that I can create a loft between the two sketches. I tried to create an angled plane taking a line of my sketch, but that plane is not what I needed. The black line what I have indicated in the picture is what I exactly want. Will be very thankful if anyone helps me out with this query.

Tony_C_

It's a bit hard to tell what you're aiming for, but is this it?

I think you're needing to add another line to create your plane from.

https://cad.onshape.com/documents/121e9c5fd8b25a2b8b48db8a/w/10e610f26bf90fcec0a1ec9b/e/16ca6fd7164ca85b44e8cee0

pratheek_hosadurga_balaji

This is something I want to create. 

Tony_C_

pratheek_hosadurga_balaji said:

This is something I want to create. 

But you're also wanting the upper sketch to be 30deg from the bottom?  

Tony_C_

I think you may need to create a plane off an intersection line from two planes

https://cad.onshape.com/documents/121e9c5fd8b25a2b8b48db8a/w/10e610f26bf90fcec0a1ec9b/e/288b8bb2f8e22ccf0eb728c5

Tony_C_

https://cad.onshape.com/help/#sketch-tools-intersection.htm?Highlight=intersect

anthony_serna

pratheek_hosadurga_balaji said:

I want to create a plane inclined to the top plane, at an angle 30 degree, in a clockwise direction. I want to copy my sketch to the new inclined plane. So that I can create a loft between the two sketches. I tried to create an angled plane taking a line of my sketch, but that plane is not what I needed. The black line what I have indicated in the picture is what I exactly want. Will be very thankful if anyone helps me out with this query.

I see what you are wanting, you want to use Plane, drop down menu in plane edit, choose line angle, use the arrow at first to see what it considers the orientation of the rotation, and then enter 30 degrees, and adjust orientation.

Like So: