Consecutive bends creeping closer
Hello
I am doing a sheet metal that is bent 5 times, each time with a 33mm flat section in between.
The bends are creeping exponentially closer together and does not keep to the line spacing.
Adjusting the hold line or the k factor has no effect.
How do I bend the sheet metal as indicated on the sketch?
Heat Shield V2 or
Answers
-
Would be easier to diagnose why this is happening if you shared the document where the problem is happening.
0 -
-
Almost! A forum bug means you need to wait a little for the link to work before you hit send!
Engineering textbook: https://hwh.stephenteacher.com/txtbook.html0 -
It looks to me like you have cosine error. That's why each bend after the first is in the wrong place. I personally haven't used a sketch the way you did for sheetmetal, but I don't think its meant to be used in that way.
Here is your link: https://cad.onshape.com/documents/ce1275d7b8aed8eaee204590/w/b111c8852655344ceb16e2e2/e/f69982566544710bffa1055d
0

