Sheet Metal Tricks
kent_henderson
Member Posts: 71 ✭✭✭
https://cad.onshape.com/documents/9a81815c22f23b548a099e06/w/129a04c6fd5f28346b881f3d/e/bd820d88e8049b4c382f4a78
Can anyone figure out how to turn this helix (lofted bosses) into a sheet metal parts?
Can anyone figure out how to turn this helix (lofted bosses) into a sheet metal parts?
0
Answers
-
don't think that this is possible, but you can do it manually - measure the length of side edges and assign it to variable using Measure Value FS (former Measure distance ext)
https://cad.onshape.com/documents/77baa8153589a7fc5f289829/w/cffd0f2a7077380d5378a885/e/d3174bf5315e6aafcb889367
and draw a corresponding flat pattern using that length value from variable
0 -
Not sure if you are open to an alternative version of the bracket:
https://cad.onshape.com/documents/a3ce389b305c0af575820da8/w/9b879ccd5faed841df649501/e/e717d520ed74c0bf091d950a
0 -
Sorry for the off topic post, but @konstantin_shiriazdanov , nice updates sir. Very useful. Thanks for sharing.konstantin_shiriazdanov said:...measure the length of side edges and assign it to variable using Measure Value FS (former Measure distance ext)
https://cad.onshape.com/documents/77baa8153589a7fc5f289829/w/cffd0f2a7077380d5378a885/e/d3174bf5315e6aafcb889367
Cheers,
Owen S
Business Systems and Configuration Controller
HWM-Water Ltd0 -
the last update was only to change the name of the featureowen_sparks said:nice updates
0 -
That's also good, I already had 2 "measure distance" icons
Business Systems and Configuration Controller
HWM-Water Ltd0 -
Thanks to all. Both ideas are appreciated. We actually do this in a vice with a Crescent wrench.to a piece of 1/8 x 1 stainless steel.Our CAD guys work in Inventor and couldn't seem to loft this boss like Onshape did (correctly). We're mainly just trying to document a product we make currently so a full solid is OK for this. I was really just trying to one up the Inventor guys and do a flat pattern. Lol. Thanks again1
