I need to add a fillet here for more support how can I do it?
meghan_frederick
Member Posts: 8 EDU
It isn't allowing me to fillet these two pieces together. Why not? 0
Best Answer
-
It does work over that step you have there intersecting with the tube
5
Answers
-
If you share the document someone should be able to help out.0
-
OS probably won't let you add a fillet because it doesn't know what to do with those two edges right next to the tube. There isn't enough material to fillet. You can instead add material using a revolve, or move the tube away from the corner to make room for the fillet.0
-
@meghan_frederick
If the cylinder and the block are separate parts, you need to merge them before placing fillet.0 -
Your document link is view only, so I can't copy and change it. But it looks like you have a small lip caused by Extrude3 that would keep you from using fillet. Modify the sketch used by Extrude3 so that it doesn't create the extra outside lip.0
-
what ever you changed made it work
https://cad.onshape.com/documents/22e1330fb42449e30e7653d4/w/70c36757a9ea6eceb270d0b2/e/5331a84812720ae7d33ea4f91 -
It does work over that step you have there intersecting with the tube 5
