Fill/solidify/extrude. Need help urgently
ahmed_fateen
Member Posts: 3 EDU
Need to solidify the biggest cylinder inwards (until the next obstacle) [To the smaller cylinder- loft -smaller cylinder]
Probably has a name I'm unfamiliar with.
Can't do it properly without any extra lines.
This is a copy so feel free to edit.
0
Best Answer
-
@ahmed_fateen
Here is an example of how I did it:
I have used 4 features: 2 sketches, an extrude and a revolve.
EDIT: Here is the link: https://cad.onshape.com/documents/fcf34d6a122d33f5e08f4099/w/cb5119fb96ffcec624c960c9/e/88c5b6019b7a7af5dd7d527a
Your version is in Part Studio 1 and mine is in Part Studio 36
Answers
-
This is what I'm trying to do
0 -
@ahmed_fateen
Here is an example of how I did it:
I have used 4 features: 2 sketches, an extrude and a revolve.
EDIT: Here is the link: https://cad.onshape.com/documents/fcf34d6a122d33f5e08f4099/w/cb5119fb96ffcec624c960c9/e/88c5b6019b7a7af5dd7d527a
Your version is in Part Studio 1 and mine is in Part Studio 36 -
@MBartlett21 Thank you very much
That was very informative; I learned a lot.2