-
Create and edit an object using a DXF file
Hello everyone, I wanted to create a part using a DXF file, center it in an object, and then remove it. Now it always displays an error and only the part that has not been centered can be removed. What am I doing wrong and are there any better solutions?…
-
when a sketch is not fully defined, is there a way to change the highlight from blue
I have a difficult time discerning blue from black in the user interface. It would be nice to be able to have those issues highlighted in an easier color.
-
Help Regarding Feature Creation in OnShape
I am trying to replicate a feature from this YouTube video at the 55:07 timestamp- The problem I encountered is that the creator is using PTC Creo and using the Face Blend feature. I was unable to match a same feature on onshape so I used the loft feature and created splines as guide curves in order to create the feature.…
-
SELF-INTERSECTING BODY (LOFT)
Hello, I saw some posts on this forum about it but none helped me. It surprising me because I don't think my issue is really specific so I think I am doing something wrong. As you can see in my document, I want to design the profile of a tube. However, when I want to connect the different parts together, I have an…
-
ISEETHATTHEDIFFERENCEOFTHEDIAMTERSOFTHESECIRCLESIS2.8 MM.BUTTHEDISTANBETWECIRCLES'EXTREMITIES ISNOT
-
Strange Undefined (?) Sketch Arc Never Goes Away
Hi, I'm a student designing for FRC team 2415 and I've discovered a weird error that I don't even understand. I was designing a gusset for our robot when these unselectable, omnipresent undefined arcs appeared in the parts studio. When I checked the assembly I had used the part it, they appeared there too! Only information…
-
Holes and Constraints
https://cad.onshape.com/documents/66ec667b69402e78d72be64c/w/5c527241399c46d4f49d969c/e/82cc5fb6ade076d13d29d41b Hello, I attempted to use the Circular Pattern tool to make my four holes in place of where had used the Center Point Circle tool and now I'm told my plane is undefined even though I can't find any blue…
-
Trouble with getting a Airfoil to work properly
I am making a Airfoil for a plane I am making in a engineering class I am taking and I am having difficulties getting the airfoil to be all 1 part and having in generate properly in Prusa slicer. I can't get the wing to all be 1 part and have it not completely break its self when I set the printer setting in Prusa to…
-
Release canidate assembly has errors on release page, but not in assembly.
I have run into this issue when attempting to release an assembly, where it throws an error in the release candidate tab. Usually when I get this specific error, I can resolve some parts or mates with the attached error flag, Okay, no problem. Let's just find the error. Nope.🤨 I also manually searched the menu, through all…
-
Flatten eliptic arc based object
Dear colleague, is there any hint-workaround for creating a flattable "something" of the attached object such that it could be finally cut on a laser cutter? All my attempts (extruding solids, thickening surfaces, extruding/thickening metal sheets) failed so far. I tried to insert a link to my document but it says that the…
-
Difficulty Lofting with Guides
Hello! I'm trying to loft the following cross-section to a point: I want to loft along the curved guide lines that lead from the vertices of the cross section to the top point. However, when I try to add those guides into the loft, I get the following error: I believe it's having a tough time reconciling the guide and the…
-
Why my Onshape was very slow
My onshape loads for ages and I have check on forums but I dont now why is doing this. I have check on this page https://cad.onshape.com/check This is the result I have My configuration is a RTX 3060 with i5 11400f My internet connection was good. Can someone help me? Thank you
-
Issues with loft function
Hello, I’m quite new to Onshape, and I’m having some issues with the loft function. I’m trying to create a propeller blade (3 cm wide) and add a twist to it. I’ve made curves that the profile should follow, and I used airfoil generators to create the NACA profile. However, whenever I try to use the loft tool to make the…
-
Script error i can't resolve please help. It's driving me nuts
here is my code. import(path:"onshape/std/standard.fs",version:"2581.0"); // Offset Skin FeatureScript for Xbox Controller (with Multiple Grip Patterns) // Creates an offset skin for an Xbox controller, allowing interactive // definition of the front face cut-out region and multiple grip patterns. export const xboxSkin =…
-
How to fix Onshape highlighting parts + layering them up??
Hello, I am a user of Onshape Educational edition, and currently use it to design a robot for the 2024-2025 FTC challenge. Recently, I've been running into some issues where Onshape, when rotating, zooming in/out, panning, or dragging, would highlight around the parts it thinks the mouse is on, and layer them up like…