Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.

First time visiting? Here are some places to start:
  1. Looking for a certain topic? Check out the categories filter or use Search (upper right).
  2. Need support? Ask a question to our Community Support category.
  3. Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
  4. Be respectful, on topic and if you see a problem, Flag it.

If you would like to contact our Community Manager personally, feel free to send a private message or an email.

hole

Discussion List

  • Featurescript UI Question

    Hello everyone. This is my first featurescript. I am attempting to expand on @jeff_brown304 's Camel project, by making an improved CAM drill tool. The intent is to have the user select a cylindrical hole surface, and subsequently unhide portions of the UI that correspond to different features that the hole may have. For…

  • Holes Wizard request

    Hello everyone! I'm a new OnShape user. Im very excited with this innovative project! Trying it with some designs, I note that no hole wizard have been developed. The lack of any automated tool for threaded/countersunk/counterbore standardized holes is a big obstacle to OneShape becoming my primary CAD soft. I hope this…

  • Hole in the Floor

    I understand how I can add a hole by first extruding a box then extruding a removal of an offset, but that sort of makes it necessary to clutter up the master sketch. I was trying to be more tidy and do the hole later, preferably in a derived document, but then: 1. there is no hole 2. we can see the walls of the hole…

  • Creating a drill angle

    Hey guys, quick question. I am working on a drawing for a friend and essentially he has a 19mm hole that is being cut 10mm deep, then he has a 10mm thru hole in the middle of the 19mm hole, so I guess more of a counterbore. He needs a 118 degree angle but I can't figure out how to do it. I attached the picture. Where I'm…

  • Countersink head size for M4.5 is not correct

    I think the numbers provided by the hole wizard are not correct for Countersink ISO Clearance M4.5 Close clearance M4: hole=4.3 head=8.96 Close clearance M4.5: hole=4.8 head=4.8 <--Head size: 7.5? Close clearance M5: hole=5.3 head=11.2 Normal clearance M4: hole=4.5 head=8.96 Normal clearance M4.5: hole=5 head=5 <--Head…

  • HOLE Feature - BSP Threads request

    Hi, I could do with BSP Threads if possible, it does not appear to be installed at the moment in the hole feature. Regards Alan