Loft problem
Discussion List
-
Loft failure when I use a third guide
Trying to run this loft with two connected profiles and two guides. To get a better shape, I added a third guide and I get this failure. All corners and curve ends are coincidented. Any suiggestions?
-
Having trouble with Lofting,
Here's my part: https://cad.onshape.com/documents/fc430255fbf1eca8eadc1da0/w/3af8d2c66a8a7904f8b05de3/e/ea3fc394e7d28d545d01b09c?renderMode=0&uiState=67a5a2168b79cd777e09ae77 I'm having two problems with Lofting so far, one where the thickness is an issue which is probably due to the other problem of not having enough…
-
BTEC Level three engineering (2010 Spec) Unit 17 Solid and Surface Modal
A short exercise which creates the same part using both techniques. https://cad.onshape.com/documents/c4beecf8b0667e99dda38486/w/5e1b8664a2f987e641d7f65d/e/fe55326887935609f3a8ac8f Happy to attach a worksheet/ instructions word doc once I work out how...
-
A Single Loft Profile on Two Different Planes - End Conditions Problems
Hi All, I have created a loft; the starting profile is a cylinder, the single end profile on two separate planes oriented at right-angles. The end condition between the loft on the cylinder is correct. The end condition between the loft and the front face is also correct I would, however, like the bottom 'end profile…
-
I want to make a helmet shape and have tried to use a loft
Hi all, I want to make a helmet shape and have tried to use a loft from a horizontal profile to a vertical profile but it will not work. It creates some intermediate steps that don't belong and I can't fix it. Any ideas? Thanks