-
Threaded Holes made with Hole feature called out for "Up to Next" in drawings
I'd like to callout a hole made as shown above where the tapped hole is made through one wall. Typically I'm used to calling this out as "UP TO NEXT" or "THRU 1 WALL" as the depth is a virtual and non-inspectable dimension. Is there any way to edit the hole callout to show as such in the drawing without manually typing out…
-
Threads and mirroring question
I have a simple model where I need to create a rod on my 3D printer that's longer than the dimensions of my printers. So I'm printing it in 3 parts - a center piece and 2 end-pieces that goes on each side of the rod. You can see the model here:…
-
How to wrap Lead screw threading around a disc to make a gear.
I am trying to make a gear that will mesh with a lead screw, and struggling with how to wrap it around a surface so that it curves around the screw to make the meshing stronger. I modeled the lead screw to the pitch I have, then created a disc so that overlaps the edge of the screw. Split the screw with planes so its just…
-
showing thread in a tapped hole now!
Ok I might have missed this but is this a new feature where it now shows the thread inside a tapped hole? I don't think I ever saw this before.
-
How do you display thread lines in a part studio?
How do you display thread lines in a part studio? I'd like dotted lines to identify this as a tapped hole, and it would be a better representation of the hole. Thanks!
-
How do I add threads to a hole.
Hello, I'm new to design/OnShape and am looking for some advice. I would like to add some threads for a M3 screw into my design but cannot figure out how to. I reached community project and have found a M3 nut but am having trouble reverse engineering it. Can anyone assist me with this?
-
FeatureScript for removing threads from imported parts?
Is there an existing FS that can be used to remove threads from imported parts like bolts/screws and nuts to improve performance? Or has someone attempted this in the past and not succeeded?
-
How to draw a screw thread?
* How to draw a screw thread?
-
Thread function
When is there going to be a thread function for holes or shafts?
-
male threat
Hello, I want to design a male threat. for example on a screw. But i dont want it for eye candy but for defining it in the drawing. just like the female threat. Can you give me a hint how to create the male threat? I can not find the way to design the male one.
-
Hollow blue thread
Just wondering why this thread I made is blue, unlike the rest of the object. And why it doesn't have a solid face that I can sketch on for the final extrusion.
-
Screw threads: Pitch vs Form
In the official tutorial on helical screw threads, an equilateral triangle is used for the thread form. It says something to the effect of, "Make the length of the triangle slightly less than the pitch of the thread." How much less, exactly? Threaded camera lenses and accessories, over the years, have generally come with…
-
Metric Screws & Nuts
I have a design I'm working on that needs over 100 screws. I plan on using simple head and body and posibly a hex head to keep it simple. But, there are a variety of screws. Mostly M5 and M4s but of various lengths ranging from 10mm to 35mm. I was thinking I could create one part studio, create one sketch and just…
-
Is there a way to put a "Stop" on a Screw Mate?? (Planer Mate?)
For instance when a bolt head seats on a washe, or two parts "Planer Mate" when screwed together. I used a Screw Mate and one part will continue to pass through the other when it should "bottom" and stop. Hmmm... I guess I could have a Planer Mate I suppress...