Fillet, Tangential Propagation

famadorian · January 2019

I'm creating a fillet on an edge, but I don't want it to propagate to the whole edge, so I turned off "propagation", but it seems it doesn't want to do it along the edge, where the edge also has been sketch filleted.

All is well if I turn on propagation, though

Any pointers?

owen_sparks · January 2019

How thick is your material? (Will a smaller fillet radius value work?)

famadorian · January 2019

owen_sparks said:

How thick is your material? (Will a smaller fillet radius value work?)

I tried 1mm, but also not working.
Here's the document:
https://cad.onshape.com/documents/35acefae7361d2f4eef1affd/v/19648a4d3800cc3434978a7d/e/8c7f5d6b7b757b4ae5e6ba47

NeilCooke · January 2019

The only way you can do this is to remove the sketch fillet and add it after the fillet you do not want to tangent propagate. If that makes sense?

famadorian · January 2019

I made a new extrude for that part of it that I didn't want a fillet for.

Thanks;)

Fillet, Tangential Propagation

Answers

Categories