Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Assembly Configurations for Cabinet Drawer Combinations
famadorian
Member Posts: 390 ✭✭✭
Is it possible to use assembly configurations for different drawers configurations in a cabinet? I'm sure I can hack it together, but is this the right way?
This one's a bit tricky, cause it's not just the number of drawers, but configurations could be 40 drawer + 10 drawer + 10 drawer + 20 drawer for one cabinet and lots of other combinations;)
This one's a bit tricky, cause it's not just the number of drawers, but configurations could be 40 drawer + 10 drawer + 10 drawer + 20 drawer for one cabinet and lots of other combinations;)
0
Answers
-
The short answer is yes
The full answer was becoming a book.
I'll make a video walkthru instead when i get back from lunch
0 -
This ended up taking a couple of attempts to get something I was happy with.
I will give a walk thru video later, Wife was taking a nap and don't want to talk in the house right now.
Here is a link to the document:
https://cad.onshape.com/documents/80a156f834ded85fa552cb74/w/74aad4aa9a0916fd34542867/e/654720b5c2c364633ed85922
Here is a video demo:
https://www.youtube.com/watch?v=zpY9XfKUmyY
0 -
2
-
I need time to process all this information, but thank you a lot
1 -
Ok, I've managed to use your wisdom to create my own cabinet;)
However, it doesn't seem to want to be inserted into an Assembly.
I tried with yours aswell.
It generates, but then doesn't get inserted into the assembly.
Does it insert for you?
0 -
My bad; it's inserting;)
Hehe, this is fantastic.
Thank you so much for this thorough explanation; it was quite a ride;)
Here's my version:
https://cad.onshape.com/documents/73a87f3825c877243eb21d4c/v/ee0a3ac7b3470f44e97fd43c/e/315868911494a97cb32c3025?configuration=List_1Qz6HGuNYWBvWm=_10;List_7zopikdoFSoUMc=_20;List_ImnZsUtSFXDUj6=_10;List_RcpJgkGh84q8Hr=_10;List_qQmj4TPNTGE3Gp=_10;List_xXGM9ejsAILG4X=_20
0 -
Hard to say right now, i'm on the muskegon river, not strong enough signal to check. I did only get the blue cabinet only when i used the mobile app.. so not sure0
-
No worries, I got it; have a good one;)0
-
Glad I could help0
-
Ok, trying now to take it to the next level;)
Each cabinet also has varying width, 200, 400, 600, 800 and 1000;)
I'm getting visions of pain here;)
I can't just use a simple configuration for width here, cause all drawers are also changing width;)
This is upping the ante.0 -
it's pretty close to the same problem, i'll sketch up an example once i'm by my computer again0
-
To be clear, you need the cabinet to have multiple drawers in hight and width.
Each drawer will have independent height and width0 -
like this?
0 -
No, that's too complex
I just want 200, 400, 600, 800 and 1000mm wide cabinets
Height is always 800mm.
This is IKEA METOD basically
Drawers are always 100, 200, 400, 600 and 800mm tall
0 -
https://cad.onshape.com/documents/80a156f834ded85fa552cb74/w/eb9a2a528a80cb3b45977f57/e/051b34155677c14b0c9fc239
Check this out and tell me if I under stood you right0 -
Indeed;) Ok, I think I got it; I will try. Thanks0
-
Here is a modular cabinet model we built. It is still in progress, but may help you out!https://forum.onshape.com/discussion/13883/modular-cabinet-model-showing-off-model#latest
0
https://www.youtube.com/watch?v=7vjhPT0xgpQ