Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.

First time visiting? Here are some places to start:
  1. Looking for a certain topic? Check out the categories filter or use Search (upper right).
  2. Need support? Ask a question to our Community Support category.
  3. Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
  4. Be respectful, on topic and if you see a problem, Flag it.

If you would like to contact our Community Manager personally, feel free to send a private message or an email.

Is any option to add tolerances (or notes) to the sketch dimension?

MS_021MS_021 Member Posts: 7 PRO

Is any option to add tolerances (or notes) to the sketch dimension?


Answers

  • MS_021MS_021 Member Posts: 7 PRO

    A dimension is not absolute and required to have tolerances.


  • john_mcclaryjohn_mcclary Member, Developers Posts: 3,890 PRO
    You can add tolerances in drawings only.

    The only way to add tolerance in a part studio sketch will be to add a comment in the dimension
    such as:
    2.0 in /* +/- .005 */

    anything in between these two marks: /* */ will be ignored by the sketch solver.
    Unfortunately they will not be parametric to a drawing... 


    And there is no way of seeing the comment until you attempt to edit the dimension (see above image)


    This is what it looks like in drawings:

  • MS_021MS_021 Member Posts: 7 PRO

    John,

    Unfortunately this “NOTE” /*tolerances*/ will be visible only if you double-click on dimension and disappears when dimension is not active.

    This time is wasted.

    Thank you. 
  • john_mcclaryjohn_mcclary Member, Developers Posts: 3,890 PRO
    I did mention that in my original post.  Sorry those are your options.

    There are some improvement requests for this somewhere. You should add your vote 
Sign In or Register to comment.