Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: Renaissance - Big update and a new tool
Thanks for the explaination.
I also hope that Onshape will release a mirror function soon.
f_g214
Re: CAM Studio - open pockets on edge of workpiece
Cam Studio does not accept sketches, but it will take a curve; you could try that.
Feature request: Configuration panels and tables
We need the ability to rename configuration columns, and also be able to re-order those columns at any time.
I've seen a number of people asking for these improvements but haven't been able to find an improvement request.
You can see the below tables only reference to the type of feature/dimension it references to. Being able to add a title would be very helpful.
Column titles should be unique within the table, but be able to be duplicated across tables.
Being able to shift the columns left and right at any time is also essential, along with being able to shift the rows up and down.
Re: Difficulties using guides with the loft
Looks doable. Please make the document public so others can make a copy.
Re: Struggling to turn a curvy 3D-scan mesh into a worthy surface
Good morning MDesign. I played with the profile splines but not the guides. Hopefully would have found and improved those as well but needed some sleep. The distortions on an old cowl are not a surprise, From the time frame these Citabria Cowls were made the original plug was probably hand shaped with the inaccuracies that involves. Over time they will also distort some due the wear and tare and stressing as well as patches under the paint. The idea is to get your development faired as best you can. Some hand blended fillers around the edges and across surfaces during install.
For a few years I did this kind of work as a side line. One customer had molds that had been stored so badly that I couldn't work with them and had to rebuild or simply build new. I was surprised at how much distortion could creep into fiber glass parts and molds over time. Had some time this morning. Replaced guide curves after editing profile curves and opened up tolerances. Doesn't look too bad. Only 1 or 2 spots I'd like to smooth a little more but need to get on with other stuff.
https://cad.onshape.com/documents/0eeaea78be73d0251e28a531/w/9b37b9dac8fd537d2c234292/e/46f915bd92ba4828ee1b9a88
Re: Partial circle centreline
If you modeled your part with a hole feature and circular patterned that - we do provide circular centermark patterns as a part of view creation. You can edit the automatic circular centermark patterns and unselect the same elements as I did in the manual tool, and then adjust the arc centermark extension in the same way as above.
Re: Improvements to Onshape - January 31st, 2025
Hey I just got a new project and I could really use the sheet metal loft feature 😅
Please hurry, I don't want to use traditional CAD 😑
.
Re: CAM Studio - open pockets on edge of workpiece
CAM Studio doesn't accept sketches it appears. As a pretty messy workaround you can create a new part though that extends the slot out to make the cut appear to the toolpath generator as a full pocket. See V15 for an example.
https://cad.onshape.com/documents/d995b98ce1b6ff36e8577afb/v/e7df65bac0ca6b4f476d7ecc/e/8b41428cd68c2ab3fe6a5a3a
For a single slot this isn't too bad but for a complex part I can see this workflow being pretty tedious.
Re: Why do my sketch lines disappear when I draw them
Probably a browser glitch… Try refreshing (ideally a "hard" refresh, SHIFT+F5 on Windows…)
