Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.

First time visiting? Here are some places to start:

Looking for a certain topic? Check out the categories filter or use Search (upper right).
Need support? Ask a question to our Community Support category.
Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
Be respectful, on topic and if you see a problem, Flag it.

If you would like to contact our Community Manager personally, feel free to send a private message or an email.

Best Of

Re: Improvements to Onshape - January 10th, 2025

https://forum.onshape.com/discussion/comment/112026#Comment_112026

Yep, this is so great for us… but still we want more power !

robert_stiles

Re: i cant figure out wht this wont extrudeno

try the new profile inspector (button next to the final button).

it'll show you some weird stuff that may be causing the issue.

jelte_steur814

Re: ¿how to make a rectangular spiral?

https://forum.onshape.com/discussion/comment/112002#Comment_112002

I ended up using your featurescript with some modifications as some max values were not enough for the spiral i needed to build, excellent!

guillermo_lovato

Re: How do you display thread lines in a part studio?

That would be nice to have.

martin_kopplow

Re: One or more tabs being moved contain workspace references. All referenced tabs will be moved as part

You've selected movement sketch part studio to be moved. It depends on something else in this workspace ( either derived part studios or a feature studio with a custom feature). If you go ahead and move, the dependencies will move with it. You can try and then revert if you don't like the result. Move out and revert would also accomplish "copy move" .

lana

How do you display thread lines in a part studio?

How do you display thread lines in a part studio? I'd like dotted lines to identify this as a tapped hole, and it would be a better representation of the hole. Thanks!

Gavin_Sheng

Re: Hole Tool: m8 thread in 6.8mm bore

Have you tried reversing the direction of the hole operation?

The_M100

Re: HOW TO RELAX FLEXED SHEETMETAL PART

Thanks for the tips guys. I'll look into ExactFlat, and I guess I should start an OS request ticket, right?

michael_mcewen

Re: HOW TO RELAX FLEXED SHEETMETAL PART

@konstantin_shiriazdanov flatten surface is in solidworks premium only! Took them several years and several attempts to develop so it is no trivial matter.

@michael_mcewen have you taken a look at ExactFlat in the AppStore?

NeilCooke

Re: Onshape is not connected. Refresh the browser to continue working on this document? (Now Sorted)

AVAST AntiTrack is blocking the connections in the browser. This it not something that Onshape can fix.

john_rousseau