Mirror an edited SM flange to opposite

allen_schultz135

Hi Bryan, you say <<Perform a mirror inside the sketch  ..>> I cannot find/hilight the part after Mirror command.

Hi Alex, same goes here, I'm trying to transform (copy), but cannot define anything.

I have also tried to find whats wrong with Sketch4, do not know what "external ref" is needed / missing?

https://cad.onshape.com/documents/100f854b232297dd1a027ef4/w/82a76a40d9c1515d01232905/e/b5352dd9c6f9a654423bd1ec

thx. Allen.

bryan_lagrange

open sketch that contains geometry of cut and place a line in the center to mirror the geometry you want cut.



edit extrude and have geometry you want cut included in the profile or as you have selected cut sketch.



https://cad.onshape.com/documents/90a8ece578394c3132902189/w/e2070b8c86a484cb32d7943a/e/ec98eef9ad24d04af9d6ca8c

allen_schultz135

thx guys, I gotit, learning. Thx. Allen.