-
Is there a way to download all student drawings from an assignment?
When students submit an assignment for me, I require that they create a dimension multiview drawing of their part. Then I grade that drawing. It would be very helpful if I could mass download all the student drawings that have been submitted instead of needing to open each drawing individually. Does anyone have a method of…
-
How to fillet or smooth out edges of a curved shape
I want the highlighted edge to also be filleted, but the tool does not seem to let me do this. Is there a way around this? Thanks
-
Internal Volume of a complex asm
I need to get the inverse of my model. Just the internal space. I have tried a few methods that I was able to previously do in autodesk Inventor (Derive a solid part and subtract the original.) I have tried to use the internal volume command, but the asm is very complex and seems to have too many openings, or other…
-
Anyone have a generic Dog Prosthetic for a front leg.
Friends of mine have a dog that had to have it's front leg amputated at the chest. No Nub left. I was just looking to see if anyone already had a model for something similar. I am new to Onshape and new to 3D printing but I would welcome any help. Cheers, Ryan
-
Cam design help
I am trying to make a cylindrical cam track with a cylindrical follower but I cannot figure out how to remove a track where it doesn't warp the path while allowing me to create a tangent mate for the follower. Here is the link:…
-
How to draw BSP thread
In Europe we use BSP pipe thread instead op NPT thread widely used in the USA. How can I make the BSP available in the hole tool?
-
Onshape is saying that it encountered a problem, when I was trying to animate.
https://lgsstudent.onshape.com/documents/989c4147660baa4b83b4291c/w/3dd9ee6cc0628469b880d0dc/e/4260aa0cb6be778c12eb5f96 What do I do? Onshape encountered a problem with your last operation. If the problem persists, contact support. Support code d8553a9a17daec8fb16f7d68.
-
how do I access documents for bootcamp?
-
Why can't I edit my bio?
When I try to edit my bio, it doesn't let me enter the typing field when I click on it. Is there any fix or alternative way to edit my bio?
-
Why is there no audio on some of the lessons?
Why is there no audio on some of the lessons?
-
I'm doing the CAD training and lesson 6 says to open the Jackhammer document but I cant find it.
-
What is the size limit for exporting a .STEP file?
I've run into some issues exporting .STEP files of large assemblies, so I have to export smaller chunks and recombine them later. What is the size limit, and what is driving it? Is there any way to increase it?
-
Help with Fillet
https://cad.onshape.com/documents/0335d2f5370fc0cb60e5cedf/w/663084dfd78627ce5d9b3f71/e/804c66af637e2dbedca0e1bd?renderMode=0&uiState=6aa6a23b27d36cf2d8751a1c Hello, I'm currently following a surfacing tutorial for Solidworks but doing it in Onshape and so far I've managed to figure out most issues I've come across…
-
Surface Text "Cut Out" extrude not generating
I can not get this text to remove (Cut Out option) on the face of this extrude. I've gone back and changed each extrude to "new" rather than add and it still won't generate. I created a second Part Studio with a basic extrude and it seems to remove text on that one. I can't figure out why it won't generate.…
-
Is there a way to add multiple selections within one isoparametric curve feature?
I'm trying to add a set of isoparametric curves along a number of different fillet faces (two curves at 0.2 and 0.8). Is there a way to do this without having to create an isoparametric curve feature for each face? I understand it would be difficult to implement something like that, especially for several non-contiguous…
-
Help with DSI
I am trying to model a diverterless supersonic inlet for my jet but none of the methods I've tried worked. Here is what I have so far: https://cad.onshape.com/documents/f72f799a2da4da5c3cf262a5/w/97a06faddac07852c31c6b60/e/1dc5920af3148c412ce707fc?renderMode=0&tangentEdgeStyle=2&uiState=6aa040970fc525fd1a99fcf6 Here is…
-
Grid/snap in drawings (not sketches)
I want to design a custom drawing template and title block as an OnShape drawing and export it to a DWT within the same document. OnShape has very limited support for drawing. Are there any user-created addons for grid/snap in a drawing? I've only found grid/snap features for sketches.
-
Wildly varying regen times with instantiate
I've got a feature that instantiates configured geometry from Part Studios in previous Version of the same doc. Three addInstance calls into one instantiator, then a single instantiate. Regen times swing by roughly 8x and I haven't been able to find a repeatable pattern. What I'm seeing Regen lands at either ~200ms or…
-
How can I give students access to certain feature scripts and drawing templates by default?
Hello! I work as a lab tech in the engineering department at a CC and I have been looking for ways to help my students get set up for prototyping on our specific manufacturing equipment more seamlessly. We have a CAD class that teaches onshape, and several intro to engineering courses that involve students developing a…
-
why is my onshapoe not loading for a part stuido?
Ive tried differnet computers and i have fairly good wifi and also i deleted cookies and forced reload my error codes each time is e14f96724ba55a1f3232efe2
-
The audio in one of the lessons disappeared and I can't seem to figure out how to get it back
-
Featurescript selection of In-Context entities from an assembly
Prologue: This is a long one, but I feel like the background of my thought process will be helpful communicating my question and I'm hoping that someone here can help me wrap my head around how in-context works. Inciting Problem: My goal was to make a featurescript that evaluates using a query that automatically includes…
-
Jackhammer Gear Cover Exercise Step 6 - Moving "Shell 1" breaks the part
When I move "Shell 1" to the bottom of the Features List, the part "breaks". The label turns red, a red arrow appears at the top of the Features List that says "1 feature failed to regenerate" and the "shell" function performed in step 3 in undone (the part is solid again). Plus the holes on one end don't go all the way…
-
Repurchased Onshape Certified Professional but unable to start exam?
I did not receive a voucher code from onshape but did receive an order confirmation email. I purchased it on August 16th(4 days ago). When I go to the certification dashboard, only the previous onshape exam( I had given the previous exam 2 years ago) comes up, not the new one that I recently purchased. Can somebody from…
-
Rib won't work about half the time
A lot of times, when I try to use rib, it just won't work. I'm almost always doing it on a cylinder, and I saw another post here on this topic and the answer was "It doesn't know what to do with the top on cylinders", but the solution was then to use extrude. There has to be a better, faster way though, right? Are there…
-
3D Connexion Spacemouse on Chrome
Hi guys. I have a wireless spacemouse set up a Dell on Nvidia P3200 Graphics. Installed the latest 3DConnexion drivers. Started Onshape in Chrome. I can only zoom in and out, not pan and tilt. The mouse works normally in the 3DConnexion trainer. Stopping and restarting the 3DConnexion server hasn't helped. A hard refresh…
-
ASSEMBLY CONFIGURATIONS
Hi all I have a top level assembly with suppression configurations. It also contains a sub assembly with its on suppression configurations. How can I specify the required sub assembly configuration in the top level configuration table?
-
Is anyone having connectivity issues with the drawing feature?
I’ve been working on a project, generating parts and drawings, but lately, when I go into the drawing section, nothing loads—though the thumbnails of the drawings I created do appear.
-
Can I use AI as I normally do while working the lessons
-
Retrieve mate connector data (host Part and entity) by id
I am trying to find the specific mate connectors that relate to a fastener mate in an Assembly. So I understand I can GET: /assemblies/d/{DID}/w/{WVMID}/e/{EID} and this provides under rootAssembly.features[i].featureData.matedEntities a mated Occurrence as below: { "id": "MbgTxbQ4oxWjiJC0b", "featureType": "mate",…