Tube with bracket

oisin_john

How do I make a tube with brackets at the bottom to attach to another surface 

martin_kopplow

Like this?

https://cad.onshape.com/documents/57f67c9f7b0a9790771e4523/w/89f8655ae19707751286cce4/e/ec8a267ec4b96ef83cec4917?renderMode=0&uiState=6596f1f7ea13503f598271b3

oisin_john

oisin_john

That’s good, but is it possible to have the bracket be one with the cylinder and the bracket should look like this 

dirk_van_der_vaart

Please share your Onshape document and explain what the problem is

oisin_john

https://cad.onshape.com/documents/57976971ff14920b7354e3ec/w/b74d3aec7196775af5a97c37/e/b3f50297c5f4fbd1c9e3c84d

I’m making a tube and it need to have three brackets on each side, and I’m not sure how to make the brackets

dirk_van_der_vaart

I had a quick look at your document and in this case it would be much easier to make all the parts in 1 Part Studio, in the right position and size.
Then import the complete Part Studio in an Assembly and finally create a circular patern for the bracket and seats.

oisin_john

Ho would that be possible, since I need the seats to attached to the tube, while he seats in the circular pattern to be attached to each other by a circular Tod going through all of it

oisin_john

And I had to decrease the whole size of the seat, so it’s tiny and I can’t work with that

dirk_van_der_vaart

Maybe it's a good thing to start with this.
https://learn.onshape.com/courses/fundamentals-multi-part-part-studios
And Onshape is parametric CAD so you design everything in the correct size