How do i design something like this?

gabor_lenart

Hey guys i need some help how to make that chamber/fillet thing on the part?

GregBrown

looks like you need to Chamfer the three edges, then Move face, then Fillet?

Or you could go crazy with some nice bridging curves and other surfacing techniques… ;)

GregBrown

looks like you need to Chamfer the three edges, then Move face, then Fillet?

Or you could go crazy with some nice bridging curves and other surfacing techniques… ;)

gabor_lenart

First I want to thank you for the reply on the post. I really like the second one. How do I achieve something like that? Do you mind share something like a tutorial or do you have any link where I can check?

gabor_lenart

Can you show me how you did that in the second image? I would appreciate it!

martin_kopplow

All three curves in the model are actually but intersections of the three cube sides with the same sphere.

https://cad.onshape.com/documents/26761bb9a612b23ab2d2ad96/w/082b8b168cfa9c4e97dee996/e/caefd62bcecd8664de159257?renderMode=0&uiState=6914a13274adbddaf28cfdc2

Once you know that, you could make it much easier, though. ;0)

Just sketch 3 identical radius tangent arcs, one on each side, then split the sides with them. Delete unwanted faces, use the fill tool.