-
Two problems when it comes to fitting parts together for my Wing
I am trying to design a wing and currently I have designed an Aileron and I want to fit it into my wing and rotate it using Assembly. My first problem is trying to properly fit the Aileron rod/hinge into the wing with assembly. Since the Wing is tapered, the hole I designed is also tapered to follow the direction of the…
-
How to achieve this perfect arc shape heat indicator for my knob
Hi! I'm new here, I can't seem to be able to figure out a way to make this work… If anyone has an idea or a complete other way to do this let me know :) Thanks! Document
-
wanted a step by step guide in completing the photo
I can't seem to get the gap right
-
How can i connect these two shapes?
This might be super simple but im relatively new to onshape…. I attempted to use the sweep tool and nothing would work, i was unsure what to select. i need to connect the ends of those two cylinder like shapes at the top, into like a rounded off corner.
-
Need help with Onshape not allowing me to reference other planar points | New to Onshape please help
Hello! I am designing a cap for the top of this motor and I need to reference the points between the motor and the new design to be able to make accurate and centered designs. Please help me either find a new solution or fix this, I'm not sure if its a bug or if its my own incompetence, Thanks!
-
Splined Gear / Splined Shaft
Hello, I am searching for a Script similar to this one, I cant use it and dont have the experience to overwrite or write a new one, maybe someone can help to find a similar one for DIN ISO / Metric https://cad.onshape.com/documents/5848a5f5f680f5104c2bb48d Best Regards and Thanks in Advance
-
How do I achieve this diamond cut like shape?
Hey Guys, Is there any easy way to achieve something like this? Is this called like a diamond cut shape?
-
i need help with making dice
i am making a set of dnd dice for fun and cant figure out how I should make a 8,10.12, and 20 sided dice. I have them inside a sphere with a weighted ball. help?
-
Why is the extrude failing?
I am new to onshape, sorry if the solution is obvious. Document: https://cad.onshape.com/documents/9b712b90de60543aeb13f190/w/e73c67801e1701d10701ad0f/e/3c56750e44be16d0653d9391
-
How do i design something like this?
Hey guys i need some help how to make that chamber/fillet thing on the part?
-
How to make loft follow guidelines on edge?
Hi there, I'm trying to make an F-35, but have some issues with the front portion. I've created a loft, and added guidelines using 3D fit splines which go from vertex to vertex. However, when I add this as a guideline to the loft, it doesn't touch the curve at all! Additionally, when I pierce the curve, and connect a…
-
Help – Why is there a gap in circle; Screenshots included
I used the grey object to create a circle, and trimmed it to form the arc. Why is there still a gap? Sorry if this is an obvious question, I'm quite new to this.
-
How to select the farthest point on an item in a sketch?
I'm trying to make a latch on a box and I would like the latch to be spaced a certain distance away from a curve, but I'm not sure how to do so. What I want to do is have the furthest left point on this curve spaced a defined distance away from a line laterally. I marked this image up to try to help explain. Link if needed
-
How would I add features to a loft?
I want to add a rectangular strip 1-2m long around the centre of my wing, the problem I am having is that I can't sketch on the surface of the wing as it is a loft from one air foil to another. Any ideas on how I could do so.
-
How to extrude at an angle?
Apologies for asking another noob question! Was unable to find anything on YouTube so have turned here in an effort to solve my dilemma. I am looking to create a hook attached to the roof of the gap (as shown in the image). I experimented with the draft tool but couldn't quite manage anything. If it helps, here is the link…