ANSI Flange in the January 2nd "What's New" video about configuration?

AlexD

Where can we find the ANSI Flange used at the end of the January 2nd "What's New" video about configurations: 
https://forum.onshape.com/discussion/7975/improvements-to-onshape-january-2nd-2018/p1 

THANKS

NeilCooke

Thought I'd made that public - it is now. Although the sizes are based on the spec (from a supplier's website), it doesn't include every permutation. I used this as an example to see how far I could push configurations to be more like a configurator.

https://cad.onshape.com/documents/36d5314a70153cbd63de384f/w/ecc6d196a635c11c03cad1c8/e/880b4fac43003796ddcb1b97

owen_sparks

Hi @AlexD

It looks like there is no "public" globe icon in that screen grab so I presume it's a private document.  Perhaps the author will be willing to make it public?

Cheers,

Owen S.

NeilCooke

Thought I'd made that public - it is now. Although the sizes are based on the spec (from a supplier's website), it doesn't include every permutation. I used this as an example to see how far I could push configurations to be more like a configurator.

https://cad.onshape.com/documents/36d5314a70153cbd63de384f/w/ecc6d196a635c11c03cad1c8/e/880b4fac43003796ddcb1b97

AlexD

THANKS.
Excellent example of pushing configuration. Impressed by using derived Flange in the elbow's configuration!

AlexD

Miss automatic part number. I hope it will come soon built-in OnShape

Jake_Rosenfeld

@AlexD

Good news, Onshape has automatic part numbering built-in already!  If your organization has Release Management turned on, you can define part numbering schemes, and then assign part numbers from a release package, from the part properties of a part, or even from a BOM in an assembly.

Short video:
https://www.onshape.com/videos/release-management-and-approval-workflows
Webinar:
https://www.onshape.com/videos/introducing-release-management-and-approval-workflows-040518