-
how to get the boolean function to work with my part studio?
I'm completely new to onshape so apologies if this is really obvious or the link doesn't work or anything, but boolean isn't working on my part studio and i'm unsure how to fix it. Thanks! https://cad.onshape.com/documents/046266b7cbbaf2273f8c31ce
-
Problems merging parts
Hi there, I am very new to 3d modeling so my issue might be just that I dont know where to look. I am trying to merge parts in part studio with the boolean function and there seems to be a problem with it. I cant figure out what is the issue or how to merge the parts together. I am trying to make box for a gift so my next…
-
Can I subtract two parts that don't intersect
I have a "mount" part and several different "shelf" parts in a part studio. Each shelf is such that the mount is inset into it, that is, each shelf part should have the shape of the mount subtracted from it. Using Boolean I'd have the mount part as the "tool" and subtract it from a shelf (the target). That's great but the…
-
boolean does not return a valid part with an imported x_t file (or step file or STL file)
Even though the imported part becomes a solid shape and you can do all sorts of modifications to it like extrude remove as well as add or boolean, in some instances it will not let me create a rotate of a section as an add and it will not let me create a boolean of these parts either. In other documents I could not boolean…
-
Mirror AND Merge?
Hello! Now that I have got to the point where I want to "Mirror" my part about a center plane, I would want the finished "mirror" to be merged into Part 1. There is no selection for this to happen during the "Mirror". I will have to create a Boolean-Merge to make both halves one part! PS Again, would be nice to have…
-
receiving a"boolean operation failed to return a vaild part"why is this and how do i work around it?
how do i get the yellow and blue parts into 1 part?
-
Boolean Operation failed to return a valid part.
Hi all, I'm trying to remove material to make a cool pattern on this conic shape I'm modeling. I have a sketch with a circle pattern, and I'm trying to extrude it all the way through the part, but my extrude feature breaks and gives me "Boolean Operation failed to return a valid part" when I try it. Please see link below…
-
Figuring out how to make pipes intersect properly.
Hello all, I am attempting to figure out how to remove the exposed parts of the side pipes inside the main larger tube. (Image below) https://cad.onshape.com/documents/87a9c28840352a9c7072260b/w/74fa444ae8d00c874c0c01fe/e/3b92ca4084ccd6cc75af390a?renderMode=0&uiState=632077d7e13313077b9b511e I have tried many different…
-
Why Is my Boolean Subtract not working correctly (spur gear tool)
As the title says, when I use a spur gear as a tool to make an internal gear the internal teeth are not correct, (there are two internal gears in the part studio but only one is having this error) https://cad.onshape.com/documents/9c536db8a82af768fcde234e/w/2f223597ac799a0b8d1bc759/e/d0b6fb91288faa434cb2bf15
-
How can i remove the material above the shell from the block? The block would act as a holder/jig.
-
Return definition.groups[g].lengthInputMethod ?
I'm having trouble returning a boolean definition. I can't get definition.groups[g].lengthInputMethod to return with true when the opposite direction button is pressed. My goal is to have an opposite direction boolean switch the user interface between "group.lengthEntities" and "group.dx". The opposite direction code has…
-
Boolean Groups (New Custom Feature!)
Boolean Groups (New Custom Feature!) https://cad.onshape.com/documents/8a8e419809a7dc3de36ff04d/w/0ed9e9d7984dea4c03a88617/e/cea8f2b22cc5318e286adaf6 How to add a custom feature to your toolbar:
-
Swept Profile Boolean Subtract
When doing a boolean subtract, is it possible to use a swept profile? Do I really need to create a solid here? In ArchiCAD, this is called a Solid Element Operation Subtraction with Downward Extrusion