drawings

I'm trying to create a drawing of an object I've modelled. One of the key dimensions is the distance between two points along the angle that joins them. I can't use the dimensions of the line joining them as there's a cut-out that splits this line. If I try to do a point-to-point dimension in the drawing, it wants that…

The hole table properties allows setting the hole location precision to 3 digits, but there's no option to set the hole diameter precision. I can make the hole diameter precision 3 digits in the table by setting the drawing default to that. I would prefer to use a drawing default of two digits, otherwise I have to…

Hi there, I have been looking for any progress on "Where Used" functionality (to remove the need to manually associate the part/assembly and drawing numbers) but haven't found anything since last August. Does anyone know of any updates on this? Thanks in advance. Tom

Hello, Is there a way to force the display of decimals in a dimension in a drawing: ex: value is 30mm. with +/- 0.005 Default tolerance for dimensions with 3 decimals is set to +/- 0.005mm How can I display 30.000 without having to force the value to 30.000- then it is underlined (overidden value) Displaying 30.000 means…

hello, I have an assembly, that is configured using configuration variables, this assembly has sub assemblies, which are in turn configured with configuration variables, and parts that are in turn configured.... I now want to create a drawing for production, but I need to draw using the assembly configuration.... I didn't…

Any tips or tricks for speeding up and/or automating drawings for configured parts and assemblies? One way would be the ability to insert the configuration table (in case that you use classic method of single table driving everything) + labeled dimensions that relate to the config table columns. Seems like there's an…

I read an old update that stated "Optional view label and/or view scale label notes for all views". But I don't see the View Label option for standard views (only the Scale Label option). The View Label option is available for other derived views (section, detail, etc.). Am I missing something? I rely on this for many…

I have updated my standard company formats/template. I would like to update my drawings to use this new format/template. I can't seem to find a way to do it without having to recreate the drawing and selecting the template when I create drawing. thanks

I am dimensioning a drawing. If I use the 'part value' then I have options to set other units, GDT, etc. However if I change the dimension value resolution (in my example .714 -> .7140) then I lose all other options (they are all greyed out) (FWIW I'm using the web app on Firefox)