merge
Discussion List
-
Having trouble getting two parts to become one due to compound angles
First, the document: https://cad.onshape.com/documents/f790c4df8cc85d2b9b7c3dec/w/88b9d6ea8cf4e90bee3c2489/e/e747193ea9e06b13514b1209 I'm making a part that snaps onto an angled rod with a tray attached to it. I made the part with a sketch in the top plane, then extruded down using the rod as the direction. And then I made…
-
How to prompt update of featurescript version in a workspace?
Onshape rocks, but this seems strange. I'm prevented from merging a Part Studio from an "old" version in a document into my currently active workspace in that same document because the old version is newer than the current workspace. If I make a new document and add a Feature Studio, I get "FeatureScript 2945;" (that might…
-
Trying to Make a 2D Shape to Then Extrude
I'm trying to make a clamping bracket that clamps around a round shaft. I have the shape I want in a 2D drawing consisting of a couple circles a couple of rectangles drawn with lines a small slice out of the circle and an area extending outward for a bracket. My thinking was I could just join or merge or delete un-needed…
-
Can I "merge" disjoint parts?
I have a sketch that has a bunch of disjoint elements (rectangles mostly) lovingly arranged relative to one another. I'd like to end up with three parts (required, desired and optional) where each is made up of N sketch elements that may or may be contiguous. I'd like to then be able to add these to a diagram and…
-
merge one part studio
Is there any simple way to merge only one single part studio to another branch ? as I can see it I ll have to make a version and delete all other parts and asm and merge. And then make a new branch from the created version.
-
To Merge Extrude or not to Merge
Would other users find it useful if "Extrude" type functions were merged? This would give you the option / advantage of toggling between a related but different feature functions without having to suppress / delete and add the other feature as necessary. For example if you chose "Extrude with draft" then at a later stage…