Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.

First time visiting? Here are some places to start:

  1. Looking for a certain topic? Check out the categories filter or use Search (upper right).
  2. Need support? Ask a question to our Community Support category.
  3. Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
  4. Be respectful, on topic and if you see a problem, Flag it.

If you would like to contact our Community Manager personally, feel free to send a private message or an email.

New Custom Feature - Arrows

2»

Comments

  • john_mcclaryjohn_mcclary Member, Developers Posts: 1,545 PRO
    edited November 2018
    Looks like it on your image, but change it to .25 revolutions, maybe it has something to do with <1

    The first time i switched turns it made the arrow straight and vertical, but after going back into the model and editing again it is flipping differently than what your animation shows. Mine is mirroring about the top plane, rather than the front or right plane.

    The link is shared with support only, It is a confidential design so the boss would shoot me if I made it public :) 
  • john_mcclaryjohn_mcclary Member, Developers Posts: 1,545 PRO
  • NeilCookeNeilCooke Moderator, Onshape Employees Posts: 2,045
    @john_mcclary did you share it with support specifically for me? I do not have access to support for security reasons so I would have to ask Lou to look at it. Let me try a few things.
    Neil Cooke, Director of Technical Marketing, Onshape Inc.
  • john_mcclaryjohn_mcclary Member, Developers Posts: 1,545 PRO
    Oh, I don't know your email to share directly, if you want to send me a message with it I'll share it with you.
  • NeilCookeNeilCooke Moderator, Onshape Employees Posts: 2,045
    @john_mcclary this looks OK to me? Is it the "Rotate" or "Arrowhead" that you need to change to make it work?


    You can share it with [email protected]
    Neil Cooke, Director of Technical Marketing, Onshape Inc.
  • john_mcclaryjohn_mcclary Member, Developers Posts: 1,545 PRO
    In the video you can see, after I flip the rotation, it is still going from the bottom right corner of the screen to the top left. But it appears to be a little steeper also
  • john_mcclaryjohn_mcclary Member, Developers Posts: 1,545 PRO
    I created a second arrow feature to test that.
    here you can see it is giving me a vertical arrow again, but you can see it is curving it along it's length


  • NeilCookeNeilCooke Moderator, Onshape Employees Posts: 2,045
    There must be something unique to that geometry that is causing the issue. I’ll have to dig in a bit deeper. As a workaround for now you can create a sketch circle to drive the arrow. 
    Neil Cooke, Director of Technical Marketing, Onshape Inc.
  • john_mcclaryjohn_mcclary Member, Developers Posts: 1,545 PRO
    Thanks for looking at :)
    I knew I wasn't crazy  ;)
  • NeilCookeNeilCooke Moderator, Onshape Employees Posts: 2,045
    Can you give me link doc permissions so I can test it in a private doc?
    Neil Cooke, Director of Technical Marketing, Onshape Inc.
  • NeilCookeNeilCooke Moderator, Onshape Employees Posts: 2,045
    edited November 2018
    @john_mcclary - thanks for sharing that with me. Fixed the issue with your geometry and also another big bug that I had not found previously. I've updated the arrow in the doc you shared with me so you can see it working. You can unshare me from that now if you wish.
    In V3 I've added two new things:
    1. Option to define helical arrow by height or angle.
    2. Option to offset straight arrow away from the axis (just for you @brian_brady)
    Please update your docs/toolbar!
    Neil Cooke, Director of Technical Marketing, Onshape Inc.
  • owen_sparksowen_sparks Member, Developers Posts: 2,149 PRO
    Groovy, thanks Neil.
    Production Engineer
    HWM-Water Ltd
  • john_mcclaryjohn_mcclary Member, Developers Posts: 1,545 PRO
    Thanks @NeilCooke
  • brucebartlettbrucebartlett Member, OS Professional, Mentor Posts: 1,814 PRO
    edited November 2018
    Great Job Neil, I'll add it to my bar too. However my FS bar is sooooooooo long now I find it really hard to find any of the FS's especially when lots also have the same initials. 
    Engineer ı Product Designer ı Onshape Consulting Partner
    Twitter: @onshapetricks  & @babart1977   
  • brian_bradybrian_brady Member, Developers Posts: 367 EDU
    NeilCooke said:
    @john_mcclary - thanks for sharing that with me. Fixed the issue with your geometry and also another big bug that I had not found previously. I've updated the arrow in the doc you shared with me so you can see it working. You can unshare me from that now if you wish.
    In V3 I've added two new things:
    1. Option to define helical arrow by height or angle.
    2. Option to offset straight arrow away from the axis (just for you @brian_brady)
    Please update your docs/toolbar!
    Danke schön
2»
Sign In or Register to comment.