Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Export of DXF scaling my sheet metal model down.
callum_ellis
Member Posts: 11 EDU
in Drawings
Hi guys,
Hoping someone can help me - I feel like this will be an easy one and I am missing something very straight forward.
https://cad.onshape.com/documents/7003e41f67253b4acc63c230/w/987b75ce0a8dc233ce4fdb63/e/445eeb93e1b4903cb68bbf9a
When I create a drawing, I paste a 1 to 1 flat sheet metal model and it produces the sizing required (great), I then export to DXF and it scales the flat sheet metal to around 25mm.
I am clearly missing an integral part of size adjustment somewhere - could I please get some guidance on how to get a flat DXF of this for laser cutting that is the same size I have created originally?
Thanks in advance,
Callum
Hoping someone can help me - I feel like this will be an easy one and I am missing something very straight forward.
https://cad.onshape.com/documents/7003e41f67253b4acc63c230/w/987b75ce0a8dc233ce4fdb63/e/445eeb93e1b4903cb68bbf9a
When I create a drawing, I paste a 1 to 1 flat sheet metal model and it produces the sizing required (great), I then export to DXF and it scales the flat sheet metal to around 25mm.
I am clearly missing an integral part of size adjustment somewhere - could I please get some guidance on how to get a flat DXF of this for laser cutting that is the same size I have created originally?
Thanks in advance,
Callum
0
Comments
IR for AS/NZS 1100