Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Slanted sloping. How does it work?
frank_förster556
Member Posts: 4 ✭
Hello,
I have to model a slanted surface (sloping from top right to bottom left on the square part) on the linked workpiece, but unfortunately I don't know how to do it. Can someone please show me which tools to use?
Thank you in advance!
Best Answers
-
robert_scott_jr_
Member Posts: 637 ✭✭✭
Hello Frank. Here's one way. I suspect there may be a cleaner, simpler method. - Scotty
0 -
eric_pesty
Member Posts: 2,385 PRO
You can do it simply using "move face" and picking mate connector for ref. Either using two move faces, or using a sketch to define the axis and one move face feature depending on how you want to control it:
Even just a single draft feature using a MC:
0
Answers
Hello Frank. Here's one way. I suspect there may be a cleaner, simpler method. - Scotty
Handyhalterung B7_Test - Copy | Part Studio 1 (onshape.com)
Thank you very much, this is so simple, yet sooo good! I tried for several days without success!
Man, there's still a long way to go until I master the tool even a little.
You can do it simply using "move face" and picking mate connector for ref. Either using two move faces, or using a sketch to define the axis and one move face feature depending on how you want to control it:
https://cad.onshape.com/documents/131d5e59a1376150cc0ccda4/w/fa64480e543d631b52d0830a/e/51268909e1e4e7eaad7bbcd3?renderMode=0&tangentEdgeStyle=1&uiState=66e8c61ab5b2f027979d373c
Even just a single draft feature using a MC:
https://cad.onshape.com/documents/131d5e59a1376150cc0ccda4/w/fa64480e543d631b52d0830a/e/0287e57db2ab593ee3e7566c?renderMode=0&tangentEdgeStyle=1&uiState=66e8c6d6b5b2f027979d37be