Helix inside non-conical surface - sweeping help needed for inverted auger.

curtis_vancura · August 2016

I need to build an auger on the ID of a conical surface that extends beyond the ends of a cone. I have succeeded with the sweep on a cone, but the rest is beyond me at this point. I profiled a cone with extensions at either end, but now it is no longer a cone. What can I do to achieve this?

Image: https://us.v-cdn.net/5022071/uploads/editor/7e/yuetro9e4gkc.png

Image: https://us.v-cdn.net/5022071/uploads/editor/wl/2i2qpd6n4wkc.png

curtis_vancura · August 2016

I tried to put a link in for the public file 'Helix Inside Cone', but the previewer deletes it?

https://cad.onshape.com/documents/31dc949cf73af5a900907bcb/w/93176645c3c6b511d132b6f8/e/8cf241cb47870a2f876b8428

Link: https://cad.onshape.com/documents/31dc949cf73af5a900907bcb/w/93176645c3c6b511d132b6f8/e/8cf241cb47870a2f876b8428

curtis_vancura · August 2016

Also, I cannot figure out how to keep the sweep attached to the cone. When I select 'Add', it still creates an additional separate part for the sweep. If I keep it as two parts, I cannot figure how to fasten it in it's place.

nathaniel_zaharia · August 2016

What about hiding the cone and then creating another just to use as a tool to create the helix. You could shape it just as you need for the helix to run whatever length you want. Then create the helix and then hide the construction cone. To attach the helix to the cone you want to keep, use a boolean add.

nathaniel_zaharia · August 2016

Also, this may help: https://forum.onshape.com/discussion/comment/8723#Comment_8723

If you scroll down, there's a guy who shows how to smoothly connect helices of varying pitch and turns.

Helix inside non-conical surface - sweeping help needed for inverted auger.

Answers

Howdy, Stranger!

Quick Links

Categories