Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Options
Reproduce complicated parts
lujain_al_marhabi
Member Posts: 7 ✭
Hello,
I am trying to reproduce those two circular parts shown below, by using only two sketch features "3 point arc" and "straight" line. However, it gets pretty messy dealing with the constraints and I am not sure if I am doing it right.
what I am trying to reproduce(top view):
https://cad.onshape.com/documents/fe3fa7d610339b1e62ef0e2c/w/884aba8326b0aa8e041fa949/e/f3416e71aa08611423af434b
and what I got so far:
https://cad.onshape.com/documents/a489d677d12306e4e6b6be7b/w/4db9eabfa413a217febbf7c6/e/4c4b4c19eb35d63c0ad9888c
can someone show me how am I doing this wrong? Thanks
I am trying to reproduce those two circular parts shown below, by using only two sketch features "3 point arc" and "straight" line. However, it gets pretty messy dealing with the constraints and I am not sure if I am doing it right.
what I am trying to reproduce(top view):
https://cad.onshape.com/documents/fe3fa7d610339b1e62ef0e2c/w/884aba8326b0aa8e041fa949/e/f3416e71aa08611423af434b
and what I got so far:
https://cad.onshape.com/documents/a489d677d12306e4e6b6be7b/w/4db9eabfa413a217febbf7c6/e/4c4b4c19eb35d63c0ad9888c
can someone show me how am I doing this wrong? Thanks
Tagged:
0
Best Answer
-
OptionsDmitry_Golovkin
Member Posts: 22 ✭✭
I would do it like this:
https://cad.onshape.com/documents/c7ba1c6debf4a305bc4325ad/w/f1bd00a37871acf722623fd0/e/06294a7c7dd237ce29f35ae5
On the sketch I used only circles, trims and fillets.
The first you may draw sketch with the sharp corners. Ffter that apply fillets. It will be much easiew way.5
Answers
https://cad.onshape.com/documents/c7ba1c6debf4a305bc4325ad/w/f1bd00a37871acf722623fd0/e/06294a7c7dd237ce29f35ae5
On the sketch I used only circles, trims and fillets.
The first you may draw sketch with the sharp corners. Ffter that apply fillets. It will be much easiew way.