Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.

First time visiting? Here are some places to start:

Looking for a certain topic? Check out the categories filter or use Search (upper right).
Need support? Ask a question to our Community Support category.
Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
Be respectful, on topic and if you see a problem, Flag it.

If you would like to contact our Community Manager personally, feel free to send a private message or an email.

part studio

Make extrude removal stop before walls get too thin while maintaining a consistent cross section
Hello all, I am trying to make a leeboard hydrofoil model on this document: https://cad.onshape.com/documents/40a09d2b7dbc0e96f864de60/w/9b820e6caf97b342e0b34d33/e/e4addd4030400b4f4e982b63?renderMode=0&uiState=687bf140abce191eed0df80b This will be 3D printed with carbon fibre spars inside it, and I have been struggling to…
ISEETHATTHEDIFFERENCEOFTHEDIAMTERSOFTHESECIRCLESIS2.8 MM.BUTTHEDISTANBETWECIRCLES'EXTREMITIES ISNOT
How to paste Mesurements into different Part Studios?
heyo, So my problem is that I want to use the measured variable "globaly" in the document (i.e adding it to variable studio). Or to explain it on my curent problem (but had this multiple times): I'm designing something that has a slide door in it. So in the first Part studio I design the contraption, the backet so to…
Strange Undefined (?) Sketch Arc Never Goes Away
Hi, I'm a student designing for FRC team 2415 and I've discovered a weird error that I don't even understand. I was designing a gusset for our robot when these unselectable, omnipresent undefined arcs appeared in the parts studio. When I checked the assembly I had used the part it, they appeared there too! Only information…
Split part - What determines which side is which?
When using the Split feature to split a part, I get two parts, great. But one of these parts seems to have the same "identity" as the original, and the other is "new". What determines which side of a split is the old part and which one is the new? Can I control it? My main reason for asking is that inserting a split into…
How to get a derived part to automatically change based on existing variables
Hello! New to Onshape and trying to streamline some stuff. I have a Part that leverages some variables in one Part Studio and I'd like to Derive this part in another Part Studio. While inserting/Deriving the part works just fine, I'd like this part to dynamically get resized based on the same variables in the Part Studio…
Scaling images in sketches
The new insert image functionality arrived just in time - I have a physical object that I need to model in 3D. I was delighted to see that I can do this: * insert image * draw a line along a particular feature of the image * set a dimension for that line * see both the line and the image resize themselves This allows me to…
making multiple parts within a design studio
I am a brand new user of Onshape but a long term SolidWorks user. Throughout the quick start tutorial it was showing multiple parts within a part studio. I'm sure its something simple but I can't figure out how to start a new part within a part studio. Do I just start drawing another body? That seems weird because then the…
Issue with controlling direction of asymmetric fillet
Hi all, Having some issues with the asymmetric fillet feature in part studio. Only one of the edges is reversed in its direction, and I can't seem to find a way to edit or control this. Does anyone have any suggestions? Are the rounded corners causing this issue? (Corners done in a previous fillet feature, not in a sketch)…
Why isn't this enclose working?
Here's the document link. The part I'm working on is in the "Outtake Parts" part studio. https://cad.onshape.com/documents/21d74e98fc4375dac84f2c2a/w/7413bb431169d2d1fdd89053/e/e0a4721fdad310f95b111da9
How do I export a configured part studio via translations?
I have a configurable part studio. I want to be able to make changes to the configuration and export the configured part studio to different formats through the API, but I keep getting an error from the translations endpoint (https://cad.onshape.com/glassworks/explorer/#/PartStudio/createPartStudioTranslation) when I try…
How to remove an part studio insert
Hello, I have been working on a assembly for awhile now and I accidently inserted a new part studio into the assembly. I have been trying to figure out a way to delete this insert but I cant seem to find a way. I have used the Hidden feature on it for now, but because of this mistake, the drawings I have are also now…

part studio

Discussion List