Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: Convenient tool / method for creating "tabs" (NOT sheet metal)
@tom_auger
Onshape lets you reuse sketch so you can have the tab shapes on your original sketch and Extrude Symmetric or Up to face with offset and the other end with Second end position.
Onshape lets you reuse sketch so you can have the tab shapes on your original sketch and Extrude Symmetric or Up to face with offset and the other end with Second end position.
Re: Is there a way to do a boolean operation with part from different tabs
Use the Derived feature to import a part from another tab.
Re: Is it possible to annotate with dimensions, a 3D (solid) part displayed ?
No that is not possible at this time. You can search and vote on the existing improvement request in the category on the right =>
Re: is it posible to personalice a toolbar wiht the function i use normaly?
Right-click the toolbar and select customize....
Re: is it posible to personalice a toolbar wiht the function i use normaly?
Or you can use the toolbar popup ("s" key) which is customizable in the preferences section of "my account" under your profile picture
Our commitment to you during these challenging times
Needless to say these are challenging times and the leadership team at Onshape is concerned about all of our users and your families. We are regularly monitoring the support channel and reading the forums. Our commitment to you is to insure that you have the best tools to help you work remotely and collaborate with your peers. This commitment is shared throughout PTC, please take a moment to read this message from Jim Heppelmann: PTC’s Commitment to You, Our Customers, During COVID-19
If there is anything you need, please don't hesitate to reach out. Be safe,
John
If there is anything you need, please don't hesitate to reach out. Be safe,
John
Re: Distance constraint parameters
Simple explanation is that it is all about distinguishing between two different cases. Take a line. Constrain one end to the origin. Add an angle dimension to a horizontal construction line. Add a point with a distance dimension to the line. See example pic below.
Change the angle dimension by a large amount so that if the point didn't have a dimension it would be on the other side of the line. It stays on the "correct" side instead, or at least on the side that most people using Onshape would expect it to be on.
It is the halfspace parameter in that case that helps the sketch do the right thing. A point on the other side of the line with the same dimension would have a different halfspace value. Note that this is not the same thing as negative values, instead it tells the sketcher which direction is positive. Alignment is different but does a similar job.
Change the angle dimension by a large amount so that if the point didn't have a dimension it would be on the other side of the line. It stays on the "correct" side instead, or at least on the side that most people using Onshape would expect it to be on.
It is the halfspace parameter in that case that helps the sketch do the right thing. A point on the other side of the line with the same dimension would have a different halfspace value. Note that this is not the same thing as negative values, instead it tells the sketcher which direction is positive. Alignment is different but does a similar job.
Re: Improvements to Onshape - March 9th, 2020
There is a small bug:cody_armstrong said:
The position number snaps to a wrong position when the mouse button is released.
Could you please fix that? Thanks :-)
Re: How to delete parts unused in an assembly from PartStudio Tab?
The best thing to do in this case is to export the subassembly and re-import into same/other doc. Then you can discard the original import.