Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: Randomly shifting lines by .0001 and scuffing entire projects seemingly at random
Not sure what the context of all that repeated work is but generally you'd only want to do maybe 1/8 of that and then mirror/pattern the rest of it.
MDesign
Re: Appearance
50%? No, but shift-T will make parts temporarily transparent. I would prefer that it wasn't quite so transparent. There's also "translucent" mode under the Camera and Render options menu (the isometric cube menu on the upper right). That makes all parts translucent, which can be useful while trying to work on internal features. By default, there's no keyboard command for that, but you can assign one.
S1mon
Re: Randomly shifting lines by .0001 and scuffing entire projects seemingly at random
Please share the doc URL. Top tip: keep sketches to 10 lines or so, not 500. Just asking for trouble.
Re: I would like a forum "for dummies"
Maybe a book instead? Have you seen the learn.onshape.com website yet? Good stuff
MDesign
Re: Where Used Without Where Used And Part Confusion
This helps a lot, thanks. I forgot that multipart studios existed. I will probably not be using them anytime soon considering what's happened here.
Many of our multipart studios appear to be dead projects, doodles. I can yank the erroneous part definitions from them and jsut worry about collapsing references in the true assemblies. I will start with screws. I will need a proper method of tabulating their properties. I can't find anything on this
The first step is getting our screws in order the hard way. My end goal is to have something like this in OnShape, but for screw parameters such as shaft diameter, shaft length, etc.
In Inventor, this is achieved by exporting a dimension parameter to an iProperty then mapping to a property in Vault. How is this done in OnShape?
Re: I would like a forum "for dummies"
I have been on onshape for just over two years now. I never learned cad 3d in my life. All I did was to follow several of the self paced courses and then started to do things. I am now designing model engines for 3d printing. Yes I am a machine engineer but all I ever learned cad wise was autocad light back in the 2D days, and that is decades ago.
Never did I have the feeling the onshape community, or the PROS, were explaining things overly difficult. In fact I found it very accessable, approachable and often instantly to the point.
Can you give us some examples? I cannot find you other post so please link to it?
I would advise you to follow the self paced courses which are free and very bitsize. Couple of short videos and then a test before you go to the next section that builds on the previous theme. Start with cad basics so you understand their way of terminology and concepts. Then go on to the sketches and after you understand the environment, go to the part building courses. By no means do you need to do all of them but these are kind of needed before you will get a feel of the onshape world. If you don't know where to find them go to the upper right of your screen and find the head with gears, this is the learning center.
Looking forward to your examples so we can try to do it again.
Re: I would like a forum "for dummies"
With Onshape’s forum, I don’t recall anyone ever taking a ‘forget you’ type of attitude. Especially towards those new to the forum. In fact, a lot of the time, long time users of the forum take time to welcome newbies. So, welcome to the forum.
I am of the opinion that a lot of the time, the reason questions may take awhile to get answered, is because those reading the original post, are possibly having a hard time understanding exactly what is being asked.
Other times, there may be some that are of the thought that the person asking the question would possibly be better off doing otherwise than what is being asked. So in a case like that, someone like me will wait for others to respond to the original post, then, at that time, I would offer up a response something like this —— ‘hey, you also MIGHT be interested in taking this approach …’
Of all the CAD forums I have ever participated in, this is the most professional and cordial of all. I say professional in that people don’t get petty as in other CAD forums I have participated in. Maybe it’s because there are a lot of engineers here.
I suggest you post your questions as clearly stated as possible, with hand sketches or the link to your document, and see what happens. There are a lot of very helpful participants here in this forum.
Re: bend face, or i dont know help
Without access to your document it will be hard to determine the cause of fragments. You will have to provide a link so that everyone can see what you did to get to the point you are.
MDesign
Re: Problem with Surface text Cut out function
Now I see my mistake! If i at first has a text heigth of 1 mm, I need too cut 1,5 mm to get a 0,5 mm cut in my surface
Thank you!
Re: I need this like yesterday. Surface creation by 3d snap
Yes, Fill has had the ability to add guides (points or curves) all along. However it is completely different code/algorithm than the other one mentioned earlier in this thread.
