USER GROUP MEETING: NON-TRADITIONAL ONSHAPE USE/ JUNE 28TH

bryan_lagrange

The Non-traditional Onshape Use User Group Meeting will be held on June 28th 5PM CDT.

There will be great presentations from Onshape wizards @john_mcclary @chadstoltzfus @samuel_holland and @matthew_mueller537 on using Onshape in ways you might not have thought was possible....or just never have thought of.

And as always those who attend will be eligible for an Onshape themed door prize drawing giveaway.

Let's make this a great meeting! If you have registered already, I encourage you to invite a friend to join us. If you haven't, below is the link. I also encourage the Onshape techs, marketing, sales, and development teams to join us as well. For those on the education side this is a great way to learn new techniques and features. 

Come one, Come all.....and bring a friend!

https://www.onshape.com/en/user-group-network/professional

bryan_lagrange

The door prize drawing will be for an Aluminum Puzzle Knot.

All who attend are eligible.

bryan_lagrange

A snippet of what will be shown at the user group meeting:

https://docs.google.com/presentation/d/e/2PACX-1vQntFNrErVpoZc37QasDFTScyVbHOh0EBjjIp2h-b1rmdJDbIqM0NzWP3HE7CgUUc2P1-bqqxQvhXlI/pub?start=true&loop=true&delayms=3000

richard_doyle

This is shaping up to be a very well attended meeting. If you haven't registered yet but want to meet a lot of fellow Onshapers, the agenda and registration link are on this page - https://www.onshape.com/en/user-group-network/professional

Richard

bryan_lagrange

I want to thank @john_mcclary @chadstoltzfus @samuel_holland and @matthew_mueller537 for the great presentations, @richard_doyle for setting things up and thank you to all who attended tonight’s user group meeting. 

Congratulations to @imants_smidchens for winning the door prize, message me with a mailing address. 

There are some good meetings coming up. If you haven’t attended one or have attended one and can’t wait for the next, now is the time to register.

https://www.onshape.com/en/user-group-network/

If you have an idea for a meeting and or want to host one, contact  @richard_doyle he can set you up.

Until next meeting 

Laissez les bons temps rouler!

john_mcclary

Let me know when the recording is up, and where to find it, I had to leave early

Otherwise. I saw some cool stuff. This was an interesting meeting all

MichaelPascoe

For those who couldn't make it, here are some quick summaries of what went down:

@john_mcclary showed off some highly configured sheet metal workflows as well as some sweet animations and card tricks.
@chadstoltzfus turned Onshape into the Wordle game and showed how to use it as a template for your own.
@samuel_holland introduced using sheet metal tools in Onshape for cardboard and flexible circuit boards! 

@matthew_mueller537 used Onshape configurations and API to physically control his robot! Digital Twins Article

https://www.youtube.com/watch?v=bZ5IoCWHz4M

richard_doyle

john_mcclary said:

Let me know when the recording is up, and where to find it, I had to leave early

Otherwise. I saw some cool stuff. This was an interesting meeting all

Shared it with your Gmail address. Let me know if you don't get a notice.

Richard

john_mcclary

Got it thanks