-
New Feature: End Cap Plus
New feature built with help from ChatGPT Sol and Onshape MCP. https://cad.onshape.com/documents/bd99601ff5b8641af79ceafa/v/aaa9be724e67cb3e33ed481d/e/cc5bfce1df64a3b5a595ee9b Description: Use the standard End cap workflow with manual face selection, or automatically discover and cap every unobstructed open end of hollow…
-
Frame Tags - Why do tagged profiles not appear in the Frame feature?
We are trying to build a custom library of existing profiles used in our products. When I tag a sketch and try to use it as a Frame profile in a separate document, the tagged profile doesn't show up. I can only see the original sketch. I have tried versioning the profile once tagged and I am obviously using these in a…
-
Can't see tagged frame profiles recently created.
The profile sketches were created by projecting the end of a component of a separate part studio, so that should not be the issue. I need to Tag the profile to use Alignment Points. I've tried refreshing and restarting the browser. Do I need to set up a user Library to use Tags properly?
-
Custom Feature: Frame Trim/Extend
I suspect this will get added to std at some point since it's a common feature to frame generators in other CAD packages like SW and Inventor, but while we wait, here's a quick and dirty upgrade to frame trim that allows frame profiles to be extended to faces if the face plane doesn't intersect the body. It's essentially a…
-
Shed assembly with configurable walls (frames) - how to create a BOM with lengths
Imagine: A shed has four walls with timber frames. We need to create a BOM with all timber (90x45mm section) x length(!) The obvious design is creating the walls using centre lines and creating frames in a Part Studio. (Yes, we also created models based on mating individual parts of timber, but this is a huge amount of…
-
Joining Tabs/Tags on Frames
Hi, Can anyone help me with trying to set up a feature script so that I can easily add in joining tab/tags to frames using either box section or angle. i have tried with the following code but keep getting errors. FeatureScript 1640; // Specify the FeatureScript version // Feature definition annotation { "Feature Type…
-
Variable name as Value
Hello There, I am new to Onshape, I came from Shapr3D, because of much bigger compexity of SW (sadly app is not that good), and I just discovered magic of variables and I really like it a lot, Now I am working on my own frames, I did quite nice setup for rectangular profiles. And I want to have parametric text in Cut list.…
-
flat pattern pipe
https://cad.onshape.com/documents/94a29a29dedff317c3554ab6/w/ebca3c9928ec9770495ca6ea/e/2393a63bb2e790deb443209b?renderMode=0&uiState=65f82fa14f7b294834c6287c i have a mitred/notched pipe. how can i make a flat pattern of this i have tried to split it and extrude a sheet metal skin but this splits it into two. have also…
-
Frame trim four pipes together
I have a job to draw up soon and there are four tubes coming up from four corners meeting in the centre I've managed to make a frame by doing it as a "v" then making a second one 90° to the first. Sketching and extrude/removing corners. Can I just select the four as a frame and have them trimmed to each other they are…
-
How does the Frame feature choose which way to orient segments?
I created three space allocation parts using a single extrude from a singe sketch. Just three simple rectangular boxes, all constructed in the same way. If I use the Frame feature and select one edge of each, all in a line, they don't all share the same orientation (see image). How does OS choose which way to orient each…